Underground cable duct rodder, flexible push/pull cable duct rod
for cable pulling operations
Features:
lexible rod: Optimal for cable/wire installation in conduits and
underground ducting
Rod housed in a study metal frame with an integral brake. Simply
rotate the wheel to guide the rod down the duct.
Permanently etched meters incremental markings allow for easy
measuring
Solid fiberglass, non-conductive
The external rod is protected from abrasion by a polymer coating.
Feed device allows rod to feed out or be back with easy push or
pull of rod
Anticorrosion,good elasticity,long working life
Application
Used to install pulling ropes and winch ropes into ducts,ready for
cable pulling operations
Inside and outside conduit drops
Used for telecom cables, cable pipe and cleaning and plastic pipe
of cloths to put
Products Details
Metal frame
Rubber wheels
Guide rollers
Parking brake
Copper head
Duct rodder, also called fiberglass duct rodder, is composed of
three parts: internal copper/steel wire, fiberglass rod, and outer
polyethylene coating. Each duct rodder comes with a sturdy steel
frame with different sizes according to the diameter and length of
the rod. Some frames are equipped with wheels, also called wheeled
duct rodder, which makes it convenient to move at the job site. FRP duct rodder is an ideal tool for underground jobs such as
pulling cables and lines through conduits, tubes, pipes or ducts.
For its high tensile strength, wear-resistant surface and elastic
body, it is widely used in the fields of telecommunication,
electric power, water conservancy, etc.
Specification
| Rod Diameter (mm) | Φ4,Φ4.5,Φ5,Φ6,Φ8,Φ10,Φ11,Φ12,Φ13,Φ14,Φ15, Φ16, Φ18 |
| Rod Length (m) | 30m~500m |
| Frame Spec.(mm) | 1300x450x1330,1200x420x1220,980x350x1000,680x240x700, etc. |
| Wall Thickness of Metal Frame | 2.2mm |
| Wheel Diameter(mm) | 300mm |
| Rod Color | White,Yellow,Red,Orange,Black,Blue ect. |
