C12000 round copper pipe type k copper pipe coil brush mirror
Product Description:
Standard: ASTM B75 B88 B280, GB/T1527-2006, JIS H3300-2006, ASTM
B75M, ASTM B42, ASTM B111, ASTM B395, ASTM B359, ASTM B188, ASTM
B698, ASTM B640, ASTM B280, ASTM B68, ASTM B75, ASTM B88, ASTM
B837, ASTM 306, EN1057 etc
Material: T1, T2, C10100, C10200, C10300, C10400, C10500, C10700,
C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400,
C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200,
C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000,
C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000,
C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600,
C70620, C71000, C71500, C71520, C71640, etc
Specification:
Thickness: 0.01-20mm
Length: 2m,3m,5.8m, 6m, or as required.
Surface:
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as
required,etc.
Types of Copper Pipe:
- Type L and Type M copper pipe: Use Type M for most home situations.
Use heavier duty Type L for underground and other special
situations. But check with your local plumbing inspector for
regional requirements
- Type K copper pipe
- In Australia, copper pipe classifications are "Type A", "Type B",
"Type C", and "Type D"
- Common wall-thicknesses in Europe are "Type X", "Type Y" and "Type
Z", defined by the EN 1057 standard pipe
- Common wall-thicknesses of pipe in the U.S. and Canada are "Type K
copper pipe", "Type L copper pipe", "Type M copper pipe", and "Type
DWV copper pipe"
Features of Copper Pipe:
- construction provides durability
- 724 psi maximum working pressure
- 150°F maximum working temperature
- Corrosion resistant for long-lasting, maintenance-free use
- Pipe Will not burn or support combustion for safety
- Pipe are Great for residential water-supply lines
- Type K Pipe or thick-wall piping is ideally used between water
mains and meters for heavy-duty vacuum-pump lines and underground
lines
- Pipe is Easy to join and install
Applications:
We manufacture a range of seamless copper tube for use in
refrigeration systems,
they are fitted with plastic caps after cleaning to maintain the
clean interior surface
(1) Copper Tube For Air-Conditioning And Refrigeration Field
Service ASTM B280
(2) Copper Tube For General Engineering Application ASTM B75
(3) Copper Tube For Regrigeration, Oil Lines, Gas Lines ASTM B68
(4) Copper Tube for cool and hot water, drinking water ASTM B88
Chemical Composition:
| Element | Content (%) |
|---|
| Cu | 99.9 |
| P | 0.008 |
Physical Properties:
| Properties | Metric | Imperial |
|---|
| Density | 8.89 g/cm3 | 0.321 lb/in3 |
| Melting point | 1083°C | 1981°F |
Mechanical Properties:
| Properties | Metric | Imperial |
|---|
| Tensile strength, ultimate | 221 - 393 MPa | 32100 - 57000 psi |
| Tensile strength, yield (depending on temper) | 69.0 - 365 MPa | 10000 - 52900 psi |
| Elongation at break ( in 101.6 mm (4 in.)) | 55% | 55% |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 117 GPa | 16970 ksi |
Product Photos:
