ASTM A285 GR.C hot rolled mild steel plate black painted finished
Product Description
- Item: ASTM A285 GR.C hot rolled mild steel plate black painted finished
- Material: Q235,10,20Mn,50Mn,SS400,S10C,S55C,St37,A36,A283(A,B,C,D),1010,1018,1020,1050,S235(JR,JOJ2G3,J2G4),1C22,1C25,1C30,1C40,1C45,1C35,1C40,1C45,1C50,1C55,etc.
- Specifications
- Width 100mm~3500mm
- Thickness 0.3mm~300mm
Length 2m,2.44m,3m,6m,8m,12m, or as required.
- Surface Varnished,PE coated,galvanized.
ASTM A285 Standard Specification for Pressure Vessel Plates, Carbon Steel,
Low- and Intermediate-Tensile Strength
ASTM A285 Grade C is a low to intermediate yield steel used in the fabrication of
carbon steel pressure vessels and boilers.
The steel is intended for use in standard tanks and boilers rather
than high pressurised vessels due to the steels lower yield
strength. ASTM A285 Grade C is supplied throughout the oil gas and
petrochemical industry.
The material has good forming and welding characteristics under
conventional methods.
Please refer to chemical and mechanical properties for this
material below.
Chemical & Mechanical Values for ASTM A285 Grade C
| Grade | C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V | Tensile
N/mm² | Yield/min
N/mm² |
|---|
ASTM A285 GR.C | 0.16 | 0.35 | 0.4/1.2 | 0.03 | 0.03 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 | 360/480 | 235 |
What is Hot rolled?
Using continuous casting slabs or preliminary rolled slabs as raw
materials, heated by a step-type heating furnace, high-pressure
water dephosphorization enters the rough rolling mill, the rough
rolling material is cut through the head, tail, and then into the
finishing mill, and computer controlled rolling is implemented.
After the final rolling, it is coiled by laminar cooling
(computer-controlled cooling rate) and coiler to become a straight
hair coil. Straight hair curls tend to have tongue and fishtail
shapes, with poor thickness and width accuracy, and often have
defects such as wave, hem, and tower.
Products' Photos
FAQ
Q: Do you accept sample order?
A: Yes sure, please contact us for details.
Q: Are you a manufacturer or trading company?
A: We are a specialized manufacturer.
Q: How about the delivery terms?
A: 1. Payment: T/T, Western Union, Paypal, 30% deposit in advance
and balance before delivery.
2. Min. Order Quantity: 100KG, or as required.
3. Transportation: By express (DHL,TNT,FedEx),air,sea,and train.
Q: How does your company control the quality?
A: Quality first. In order to guarantee high quality for our
products,
Modern always makes a serious inspection for all products and raw
materials in strict procedure.
Q: How about your after-sales service?
A: As a professional steel exporter, we offer promote technology support for all problems and
questions.
Besides, we accept goods return or replace for quality problem.
