1. The motor power of whole machine is only 4.4KW, and adopt the
frequency conversion design.
2. The two sides of rollers, the surrounding area of cabinet and
all steam pipes had been constructed to save hot energy.
3. Adopt the effective management of steam use, can save steam
consumption nearly to 25%.
4. The roller is made of boiler carbon steel, the pressure
resistance is better than stainless steel.
5. Three sets of rollers are all designed double-sides ironing
,which effectively ensure the ironing quality.
6. Partial rollers adopt no small guide beltdesign, eliminate the
marks of small guide tape.
High speed industrial ironing machine
Design of energy saving:
1. The motor power of whole machine is only 4.4KW, and adopt the
frequency conversion design.
2. The two sides of rollers, the surrounding area of cabinet and
all steam pipes had been constructed to keep the warm, the steam
consumption is down by 5%.
3. Computer control and programmable design, accordingly to the
working of industrial ironing machine, freely set the flatwork
ironer’s steam supply time when pre-heating, working, mid-rest, off
duty. Adopt the effective management of steam use, can reduce the
steam consumptions effectively. Compared the common laundry ironing
machine, the steam consumption is reduced nearly to 25%.
Safety design:
1. The roller is made of boiler carbon steel, the pressure
resistance is better than stainless steel.
2. The thickness of roller is 10-11mm, and the design of bear
pressure is 1.5mpa , test pressure is 1.2mpa, the max working
pressure is 1mpa, Safe and realiable.
3. The relief valve is designed at the entrance of total steam
inlets, as long as the supply of steam pressure is more than 1mpa,
the control system is into work. Automatically shut down the steam
supply of whole machine, until the steam pressure returned normal.
High quality flatness design
1. The surface of all rollers are grinded and processed , high
finish, which effectively improve the ironing quality of cloth.
2. Three sets of rollers are all designed double-sides ironing
,which effectively ensure the ironing quality.
3. Partial rollers adopt no small guide beltdesign, eliminate the
marks of small guide tape.
Model & Specs | HYP-VI (6 rollers) |
Length of ironing roller(mm) | 3300/3500 |
Diameter of ironing roller(mm) | 650 |
Ironing speed(m/min) | ≤60 |
Steam pressure(Mpa) | 0.1～1.0 |
Motor power(kw) | 4.4 |
Overall weight(kg) | 11000 |
Exterior dimension(mm) (length*width*height) mm | 4670×4790×1920 |
