| Item | Specification |
| Printing | Direct thermal printing |
| Print width | 2-inch (48mm, 384dots) |
| Resolution | 203dpi, 8dots/mm |
| Character size | Font Size A : 12x24, Font Size B : 9x24, Font size C : 8x16
KOR : 24x24 [16x24], CHN, JPN : 24x24 |
| Optional character set | Alphanumeric : 95, Extended Graphics : 128X31 pages, International
: 11,
Simplified/Traditional Chinese, Japanese, Korean |
| Characters per line | Font A : 32cpl, Font B : 42cpl, Font C : 48cpl
Option : KOR, CHN, JPN : 16cpl |
| Printing speed | 100 mm/sec (MAX) |
| Dimensions (WxDxH) | 79.5 x 114.3 x 43.5 mm (standard)
79.5 x 118.4 x 43.5mm (MSR option) |
| Weight | 201g [Standard], 217g [MSR option] |
| Interface | Bluetooth Ver4.0, UART(RS-232C) |
| MSR [option] | ISO 7810/7811/7812, Triple tracks (1&2&3 Track Reading)
**Supports 3DES & AES encryption (3DES is standard) [option]** |
| Paper supplied | Thermal roll paper (58mm wide, 40ø) |
| Barcodes | 1-dimension : Code128, Code39, I2/5, Code93, UPC-A, UPC-E,
EAN8, EAN13, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix, Micro PDF417,
Truncated PDF417, MAXI CODE |
| H/W Spec. | MCU : RX-32 bit, RAM : 128M bit, Flash : 64M bit |
| Receive buffer size | 1M bytes |
| Battery (Li-ion Battery) | Rechargeable 7.4V DC 1,200mAh |
| Battery duration | 1 hour continuous printing |
| Battery charger | Input (100~250V AC, 50~60Hz)
Output (8.4V DC / 0.8A), 4 hours full charge time |
| Smart card reader | X |
| LCD | X |
| Free Fall(Drop test) | 1.5M |
| Sensor | Cover open, Paper End (Black Mark) |
| Operating temperature | -10°C~50°C |
| Storage temperature | -10°C~70°C |
| Driver | Windows, OPOS, Linux CUPS |
| SDK | iOS, Android, Windows, Window CE, Linux SDK |
| Apple MFi certified | O |
| MCBF(Mean Cycle Between failure) | Mechanical | 37,000,000 lines |
| Head | Approximately 50Km |
