JSP-2 steel base self-lubricating skateboard Product parameters
| Product Name: | Self Lubricating Skateboard |
| Keywords: | Graphite Slide Plates |
| Dynamic Load: | 10N/mm2 |
| Material: | Steel Base |
| Static Load: | 70N/mm2 |
| Line Speed: | 0.15m/s |
Product Features:
JSP-2 steel-based inlaid self-lubricating skateboard is made of
steel plate as the base body, and the surface is set with a special
formula of solid lubricant at a certain angle and density. The
product combines the wear resistance of steel and the
self-lubricating property of solid lubricant. So that it does not
need to be maintained or used during maintenance. The product has
the characteristics of high bearing capacity, impact resistance and
strong self-lubricating ability, and is especially suitable for
heavy load, low speed, reciprocating or swinging, etc., which are
difficult to lubricate and form an oil film. Moreover, its working
life is longer than ordinary sliding bearings.
Products are widely used in high load, intermittent or rocking
sports. If the product can be used for reciprocating guide bushes
that work frequently, such as automobile molds. It is especially
suitable for the support of the hoisting machinery. Example:
excavator support, crane support, etc. However, since the substrate
is made of steel, it should not be used in water or in acid and
alkali.
Applications:
In mechanical design, if you encounter the following difficulties,
you may consider using
1. The oil lubrication film cannot be maintained under low speed
and heavy load conditions;
2, work at high or low temperatures, or the ambient temperature
changes greatly;
3. Impact loads are likely to occur during work;
4, need to start frequently or under high load;
5, long maintenance period or high maintenance costs, requiring a
long working life of the bearing;
6. It is difficult to supply lubricating oil due to working
environment or mechanical structure restrictions.
The product is also available in standard straight sleeves, flanged
bushings, bushings, and thrust washer gaskets. Can also be
customized according to customer requirements.
Technical Parameters:
Static load: 70N/mm2;
Dynamic load: 10N/mm2;
Line speed: 0.15m/s;
Fluid lubrication: 0.25m / s;
Max. PV: 0.8N/mm2*m/3;
Compressive strength: 150N2;
Operating temperature: -40C ~ +400C;
Coefficient of friction: 0.08 ~ 0.20;
Hardness: HB>160.
