JDB-1 brass inlaid self-lubricating bearing
Metal base
JDB-1 brass inlaid self-lubricating bearing
Word:[Big][Middle][Small]Mobile page qrcode2018/7/24Viewed:11
Sharing
JDB-1 brass inlaid self-lubricating bearingProduct parametersSubstrate properties
1. Can be used for a long time without maintenance;
2. Designed for high static load and dynamic load bearing;
3. Has a very low and stable friction factor, no "sticking"
phenomenon;
4. It is resistant to dust, corrosion, impact and edge load;
5. The metal substrate has good shock absorbing ability;
6. Can be used in a wide temperature range;
7. It is suitable for occasions where reciprocating, rotating and
oscillating are frequently started and it is difficult to form an
oil film.
Material organization
JDB-1 brass inlaid self-lubricating bearing is made of
high-strength copper alloy as the base material. According to the
working condition, the hole is machined in the working surface
according to the working condition and filled with solid lubricant.
The high-strength copper alloy provides high load. The ability of a
solid lubricant can form a lower friction pair.
Technical Parameters
typical application
Metal self-lubricating bearings can be used in dry friction, high
temperature, high pressure, corrosive environment, humidity and
chemicals. They are widely used in automobile production lines,
hydraulic engineering, reservoir gates, injection molding machines,
continuous casting machines, metallurgical machinery, mining
machinery. , turbine generators, hydroelectric generators and other
fields.
