Applicable cable:
Description:
• Long life, no corrosion, aging resistance, pressure resistance,
high temperature and normal work. There is a test hole on the back
of the connector. Test holes can be used to check if the wires are
energized.
• No tools required in use, one plug can be used, greatly reducing
the wiring work time. In fact, for home decoration, after the
vertical connection terminal technology, each wire connection will
save the wire length of about 500px , saving more than 80% of
working hours, the comprehensive cost is greatly reduced.
• Suitable for soft and hard single-strand and multi-strand. Widely
used in lightings, fans, automatic doors and all small appliances.
• The lever nut is a reusable and innovative connector. If you need
to replace other wires, simply pull up on the small levers, pull
out what you need and replace them. The XHF lever nut features a
special scientific design that saves space. When you combine wires,
you don't need to worry about the distortion between the wires. The
XHF cable connector will help you create a clean and beautiful
house.
• You can connect wires without any tools with your hands. Push the
orange handle to 90° and plug in the wire (peel the wire case to
0.35-0.47 inches and make sure the wire is inserted into the end.
Do not open the wire case for too long) and place the back of the
wire clip. When you make an electrical connection, you only need a
little power to push the lever up.
How to use:
• Strip the wire insulation jacket 9~10mm
• Pull the operating handle to open the inlet hole and insert the
wire
• Then return the operating handle to its original position and the
wiring operation is completed
