85 Hrc Tungsten Carbide Inserts For Tufastone Marble Qranite
Cutting
Tungsten Carbide Inserts Introduction
Application for rock and stone: such as
limestone,sandstone,tufastone marble qranite,etc
The usual grade for ss10 is YG8 YG6 YT15 YT5 K30 K20 P30 etc.
Hardness more than 85 hrc and long working-life
We have two type:A and B
The demension such
as:20*12*3.0mm,20*12*3.2mm,20*12*3.4mm,15*10*5mm,14.8*10*4.8mm
14*10*4.7mm,13.5*10*4mm etc. there are too much demension,
Pls kindly let me know yours
Tungsten Carbide Inserts Mains Grade
| Grade | ISO | DENCITY (g/cm3) | TRS (N/mm²) | HARDNESS (HRA) | APPLICATION |
| YT15 | P10 | 11.1-11.6 | 1500 | 91.5 | For the semi-finishing and finishing of carbon steel,alloy steel. |
| YT14 | P20 | 11.2-11.8 | 1550 | 91 | For the midium speed rough and semi-finishing of carbon steel,alloy steel. |
| YT5 | P30 | 12.5-13.2 | 1600 | 89.5 | For the midium speed rough and semi-finishing of carbon steel,alloy steel. |
| YW1 | M10 | 12.7-13.5 | 1800 | 91.5 | For the midium speed and low speed semi- finishing of heat-resisting steel,managese steel, stainless steel. |
| YW2 | M20 | 12.5-13.5 | 1700 | 90.5 | For the midium speed and low speed semi- finishing and fine finishing of heat-resisting steel,managese steel,stainless steel. |
| YG6X | K10 | 14.8-15.1 | 1800 | 91 | A fine grain grade with better wear resistance and similar strength as that of YG6 grade, suitable for cutting of chilled and alloyed refractory steel, alsosuitable for finishing of normal cast irons. |
| YG6A | K10 | 14.7-15.1 | 1800 | 91.5 | A fine grain grade with excellent wear resistance and suitable for semifinishing of chilled cast iron, nonferrous metals and their alloys,but also suitable for semifinishing or finidhing of hardened steel and alloy steels. |
| YG6 | K20 | 14.9 | 1780 | 90.5 | With better wear resisitance,and suitable for semifinishing and finishing of vast irons,non-ferrous metals and their alloys,non metallic materials at medium cutting speed. |
| YG8 | K20 | 14.7 | 1900 | 89 | With good strength,better impact and shock resistance than that of YG6,but lower wear resistence ;suitable for roughing of cast irons, nonferrous metals and their alloys,as well non metallic materials at low cutting speed. |
Tungsten Carbide Inserts Size
| 12*12*4.0~5.0mm | 15*10*5mm | 20*12*3.0mm |
| 13*7*5mm | 16*12*3.2mm | 20*12*3.2mm |
| 14.6*9.8*5mm | 18*12*3.35mm | 20*12*3.35mm |
| 14*10*4.7mm | 19.6*11.9*2.9mm | 20*12*3.4mm |
| | 20*12*3.5mm |
hot selling size
14.6*9.8*5mm, 18*12*3.35mm,19.6*11.9*2.9mm;20*12*3~3.5mm
About order
1. any inquiries ,reply with 24 hours.
2. competitive price:factory price will be competitive.
3. MOQ:5kgs,if less than 5kgs, it will be seen as sample order.
4. Non-standard shape products can be made.
5. The order schedule will be sent by salesperson every week.
