380VAC AVR Industrial Voltage Stabilizer Three Phase 120KVA With
LCD Display
1. Product Introduction
The product introduced here is a 120KVA three phase high power
voltage stabilizer. Please see the parameters of this product
below. Also, the comparision between three phase high power
stabilizer and single phase high power stabilizer of this capacity.
| Basic Product Parameters of SBW-120KVA and DBW-120KVA |
| Product Name | Three Phase High Power Voltage Stabilizer | Single Phase High Power Voltage Stabilizer |
| Product Brand | Ewen Power or OEM, ODM | Ewen Power or OEM, ODM |
| Product Model | SBW | DBW |
| Rated Capacity | 120KVA | 120KVA |
| Input voltage | Three Phase: 304-456V | Single Phase: 176-262V |
| Output voltage | Three Phase: 380V±2% | Single Phase: 220V±2% |
| Input current | 182A | 545A |
| Output current | 182A | 545A |
| Output voltage precision | ±2% normally |
| Rated working frequency | 47Hz~63Hz |
| Power factor | ≥98% |
| Response time | ≤1s when the input voltage fluctuates less than 15V |
| Ambient temperature | -10°C~45°C |
| Insulation resistance | ≥2MΩ |
| Waveform distortion | Nil |
| Overload capability | Double rated current for 30 seconds |
| Protection functions | Over-voltage, over-current, under-voltage, over-load, phase
failure, lack phase, time delay, etc. |
2. Product Description
Three phase full automatichigh power compensation voltage
stabilizer is applied to places or areas with fluctuating voltage.
When the power network voltage fluctuates or the load current
varies, the voltage stabilzier could automatically regulate the
output voltage to ensure the normal function of the electrical
equipment.
It has advantages of large capacity, high efficiency, fast response
rate, no additional waveform distortion, stable voltage adjustment,
suitability for all kinds of loads, strong instantaneous overload
bearing capability, chaacteristic of working continuously, various
protection functions.
3. Protection Functions
① Over-voltage protection: the voltage stabilizer is provided with
over-voltage protection. When the output voltage is higher than the
set figure, the stabilzier would cut off the power supply
automatically to ensure the normal performance of the electrical
appliance.
② Under-voltage protection: the same as the over-voltage protection
function, the product would power off if the output voltage is too
low to protect the latter electircal appliance.
③ Over-current protection: to avoid unnecessary damaging of the
product brought about by over current, the protection fucntion of
over current is designed with the stabilizer.
④ Over-load protection: the voltage stabilizer would stop working
if it is over-loaded.
⑤ Time delay: there are five-second time delay before output.
4. FAQ
① What is the MOQ ?
One set as mentioned in part one.
② Is OEM/ODM available?
Yes,Certainly. Our products can be CUSTOMIZED according to your
needs. We could produce the product according to your drawings or
thoguhts. Please do not hesitate to tell us your requirements.
③ Can we put my own logo on the stabilizer?
Yes, it's acceptable. You could show us your logo and we can put it
on the products.
④ What is the Terms of Payment?
T/T, L/C, Western Union etc.
⑤ Are you a manufacturer or trading company?
We are both a manufacturer and trading company.
⑥ What about the warranty?
We provide you with 12 -months' warranty period. If there are any
problem, please feel free to let us know.
If you have any more questions, please contact us without any
hesitation.
5. Product Diagram
