90KVA Ac Automatic Voltage Stabilizer 50Hz To 60Hz 3 Phase Voltage
Regulator
1. Product Overview
① The AC Power Stablizer is also called AC Power Regulator. It can
be three phase or single phase. This product is three phase one.
Its model is TNS(SVC)-90KVA. It's widely used in many places that
needs stable three phase voltage.
② The input voltage of this product is 380V±20% while the output
voltage of it is 380V±2%. However, it could be 400V, 420V, or any
other voltage that you wants.
③ Its usage is to regulate and stabilize the voltage. It could be
used in the following places: factories, plants, wharfs, shcools,
hospitals, and other scenes needing steady output voltage so as to
ensure the normal operation of machines.
2. Product Parameter of 90KVA
| Product Name | AC Power Stabilizer | Product Model | TNS(SVC)-90KVA |
| Input Voltage | 304-456V | Output Voltage | 380V |
| Output Precision | ±2% | Working Frequency | 50HZ/60HZ |
| Response Time | <1s | Working Altitude | Less than 1000M |
| Working Temperature | -10℃~40℃ | Rated Capacity | 90KVA |
| Input Current | 109A | Output Current | 109A |
| Insulation Class | F | Insulation Resistance | ≥2 MΩ |
| Protection Class | IP20 | Waveform Distortion | Nil |
| Function | Stabilizing Voltage | Overload Capacity | 30s with 120% of Rated Capacity |
3. Product Parameter of TNS(SVC) Series
| Model | Rated Capacity | Input Voltage | Output Voltage | Output Current |
| TNS(SVC)-6KVA | 6KVA | 380V±20% | 380V±2% | 7.29A |
| TNS(SVC)-9KVA | 9KVA | 380V±20% | 380V±2% | 10.94A |
| TNS(SVC)-15KVA | 15KVA | 380V±20% | 380V±2% | 18.23A |
| TNS(SVC)-20KVA | 20KVA | 380V±20% | 380V±2% | 24.31A |
| TNS(SVC)-30KVA | 30KVA | 380V±20% | 380V±2% | 36.47A |
| TNS(SVC)-40KVA | 40KVA | 380V±20% | 380V±2% | 48.62A |
| TNS(SVC)-50KVA | 50KVA | 380V±20% | 380V±2% | 60.78A |
| TNS(SVC)-60KVA | 60KVA | 380V±20% | 380V±2% | 72.93A |
| TNS(SVC)-90KVA | 90KVA | 380V±20% | 380V±2% | 109.40A |
| TNS(SVC)-100KVA | 100KVA | 380V±20% | 380V±2% | 121.55A |
4. Applicable Circumstances
First, when the voltage fluctuates severely so as to influence the
normal working of your appliance, the AC power stabilizer could be
used here.
Second, when your appliance is of high precision, it need stable
voltage to help it work continuously.
Third, when the voltage is relatively low, your equipment can not
work normally.
Four, the voltage is too high or too low, which might damage your
equimpent.
5. Capacity Choosing
① When the load is resistant one, like lamp, electric furnace, and
resistance wire, you have choose a stabilizer with 1.5 to 2 times
of the rated capacity of your appliance.
② If the load is inductive or capacitive, it is suggested that you
purchase a stabilizer with 3 to 5 times of the rated capacity of
your equipment. For example, electromotor, pump, air conditioner,
and refrigerator. When you want to stabilize the voltage when these
equipment work, buy a stabilizer with proper capacity.
③ If you are not sure what the characteristic of your loads, please
purchase a stabilizer with at least 3 times of the rated capacity
of your appliance. Or you could consult us with regrad to this
question.
6. Use Instruction
① After receiving the product, please check whether the package is
intact first.
② Unpacking the wooden case, check if the product is undamaged
after a long-time shipment.
③ Open the door of the iron enclosure and to read the wiring board
to see how to connect wires to this product.
④ Please power off before you connect wires to ensure your safety.
⑤ After you connect all the wires, check again if the wires are
correctly connected to the right position.
⑥ Power on after finishing all the procedures above mentioned.
7. More about Our Company
Please have a look at a part of our workshop. We are both a tading
company and manufacturer.
