50Hz 10KVA Single Phase Voltage Stabilizer 220V 110V With LCD
Display
1. Quick Details
Product name: single phase voltage stabilizer
Porduct type: TND-10KVA
Rated capacity: 10KVA/10000VA
Rated frequency: 50Hz to 60Hz
Input voltage range: 160VAC to 250VAC or 80VAC to 130VAC or
customized
Output voltage: 220V/110V/customized according to your needs
2. Technical Parameters
| Insulation Class | Class F | Insulation Resistance | ≥2MΩ |
| Working Temperature | 10℃~45℃ | Ambient Humidity | 20%~90% |
| Ambient Altitude | Less than 1000 meters | Ambient Environment | Well-ventilated |
| Dielectrical Strength | 2000VAC/MIN | Temperature Rise | ＜80℃ nomrally |
| Output Precision | ±2% | Input Display | Digital |
| Output Display | Digital | Response Time | Less than 6 seconds |
| Weight | 35kg for reference | Material | Copper |
| Protections | Over-voltage protection: 246V±4V |
| Under-voltage protection: 196V±4V |
| Time-delay protection: 5 seconds before outputing voltage to latter
electrical equipment |
| Over-current protection: if the current is over rated one, the
voltage stabilzier would stop working by cutting off the power
automatically. |
3. Product Description
TND Series single phase voltage stabilizer consists of contact
copper regultaion coil, servo, motor, automatic control circuit,
carbon brush, and some other essential parts.
The working theory goes like this: when the grid voltage
fluctuates, the sampling control circuit gives out a signal to
drive the servo motor. Then the servo motor drives the carbon brush
to move along the surface of the copper coil. Through the movement
of the carbon brush, the voltage is regulated to 220V or 110V or
any voltage that you need.
It has several protection functions: over-voltage, over-current,
under-voltage, over-temperature, over-load, and time delay etc.
4. Product Features of TND-10KVA
First, it has high response rate. It only takes the stabilzier one
second to react and regulate the voltage if the input voltage
fluctuates less than 15V.
Second, its output precision is relatively high. It's up to ±2% of
the rated output voltage.
Third, it has no waveform distortion. The waveform keeps what it is
through the voltage stabilizer.
Fourth, it has dual output terminal: 220V and 110V. If you need
110V voltage, then you can connect wires with 110V terminal. If
220V, then 220V terminal could be used. It's very convenient for
you to use the product.
Fifth, it works steadily and soundly to regulate the voltage. You
don't need to worry about the performance of the voltage
stabilzier.
Sixth, it has a LCD display screen, which shows you all kinds of
data, including input voltage, output voltage, input current,
output current, and working conditions (over-voltage,
under-voltage, and normal) etc.
5. Product Pictures
