Data sheet of Pneumatic stencil cleaner HS-600.pdf...
Standard Size 740x740mm Steel Mesh SMT Auto Aqueous Stencil
Cleaning Machine
Machine introduction
The machine (Model:HS-600) - pneumatic SMT stencil cleaning machine
is designed for cleaning solder paste, red glue, flux, rosin, on
the surface of the stencils after the printing of SMT process. The
machine is powered by the compressor air, use air filter and
transfer the filtered air to the spraying bar, and at the same time
the air pressure will drive the pump, and the pump will siphon the
cleaning solvent(alcohol) to the spray bar, so the solvent will
spraying out to the stencils. The spraying bar is rotation
spraying, that will make sure no cleaning dead corner. And after
cleaning the spraying bar will spray the air to drying the
stencils. The machine is automatic cleaning, with one-button
operation, we put the stencils into the cleaning room, and set the
cleaning and drying time, press the "start" button, then we wait
the till the process finished.
Features
1, The whole machine body is made of SUS304 stainless steel,
durable and stable, that make sure the operating precision.
2, Full pneumatic operation, the machine is powered by the
compressor air, no electricity, very safe.
3, Using the alcohol as the solvent, the machine equipped with the
3 level filter system,the solvent can use repeatly.
4, Easy operation, after set the parameter, press the button, then
the cleaning and drying complete automatically.
5, Two sets cleaning bar 360 degree rotation cleaning, each side
one bar, no cleaning dead corner.
6, All the pneumatic parts are using famous brand, ensure the
quality in every details.
7, Easy maintenance, open the cover and the operator can change the
filters easily.
Specification
| Model | HS-600 |
| Power supply | Compressor air |
| Application | stencil,metal mesh, steel mesh,cooper screen,gule screen |
| Stencil size | standard 29inch and below,740*740*40mm |
| Cleaning solvent | Alcohol |
| Cleaning liquid capacity | Max 45L,Min20L |
| Best cleaning fluid using volume | 40L |
| Liquid consumption | 120ml/pc |
| Cleaning method | Rotary double side pressure injection and high pressure air |
| Cleaning time | 2~4 Min Stencil and Copper Screen |
| Drying time | 2~5 Min |
| External air supply | 0.4Mpa~0.6Mpa |
| Consumer air quantity | 400~600L/Min |
| Air outlet size | φ125*25mm |
| Solder dross filter mode | 3 level filter(10um,5um,1um) |
| Weight | 305kg |
| Machine dimension | 980MM(L)*700MM(W)*1730MM(H) |
Cleaning performance
