Customized 3 Inch Air Diaphragm Pump , High Flow Waste Oil
Diaphragm Pump
3 Inch Air Diaphragm Pump Application
1. The pump can suck the peanut, pickles, tomato slurry, red
sausage, chocolate, hops and syrup etc.
2. The pump can suck the paint, pigment, glue and adhesive etc.
3. The pump can suck various glazed slurries of tile, porcelain,
brick and chinaware etc.
4. The pump can suck various grinding materials, corrosive agent
and clean the oil dirt etc.
5. The pump can suck various toxin and flammable or volatility
liquid etc.
6. The pump can suck various wedge water, cement slurry and mortar
etc.
7. The pump can suck various strong acid, alkali and corrosive
liquid etc.
8. It can be used as a front-step tranmission device of the solid
and liquid separation equipment.
3 Inch Air Diaphragm Pump Parameters
| Description | Unit | Reference Figure |
| Maximum air inlet pressure | Mpa | 0.83 |
| Maximum flow rate | L/Min | 378 |
| Maximum lift | M | 70 |
| Maximum outlet pressure | Mpa | 0.83 |
| Maximum particle size | mm | 6 |
| Weight | kg | 23 |
| Noise level | db | ＜70 |
3 Inch Air Diaphragm Pump Advantage:
Pneumatic diaphragm pumps are operated with compressed air .
diaphragm pumps is suitable for pumping fluids with particles, and
various liquids, which are highly viscous, volatile, corrosive or
toxic, as well as colloids. The pump body is made of aluminum
alloys, cast iron or stainless steel. The diaphragm is made of high
quality rubber such as Nitrile rubber, chloronorgutta rubber,
fluoroine rubber. The diaphragm pumps are widely used in the
petroleum chemical, electronic, ceramic, food and textile
industries.
Remark: The pumps weight in the table are approximation.. Will be
caused differences because of the components. Just for reference.
Material Temperature Limits(Diaphragm/ball/sealed material)
Material | Application temperature range |
POM | 10°-180°F (-12°- 82°C) |
Santoprene® | -40°- 225°F (-40°- 107.2°C) |
PTFE | 40°- 220°F (4.4°- 104°C) |
Nitrile | 10°- 180°F (-12°- 82°C) |
Viton® | -40°- 350°F (-40°-176.6°C) |
PVDF | -20°-150°F (-12°- 93°C) |
Hytrel® | 10°-200°F (-28.9°- 65.5°C) |
PP | 32°- 175°F (0 -79.4°C) |
3 Inch Air Diaphragm Pump Application
Stainless Diaphragm Pump MAINTENANCE
- Refer to the part views in the assembly chart for the parts’ number
and name to understand the information of the part and service
kits.
- Parts which marked with “Vulnerable parts”, to prepare these parts
in hand will help you save time for fast maintenance and reduce
downtime.
- Maintenance service kits’ functions are separated into 2
independent sections: 1, Air kits; 2, Wet kits. Wet kits will be
further subdivided to match the material options for typical parts.
- Provide a clean work surface to protect sensitive internal moving
parts from contamination from dirt and foreign matter during
service disassembly and reassembly.
- Keep good records of service activity and include pump in
preventive maintenance program.
- Before disassembling, empty captured material in the outlet
manifold by turning the pump upside down to drain material from the
pump
