220VAC 3/4'' Stainless Steel Direct Lift Diaphragm 2S200-20 SUW-20
UNi-D Type Normally Closed Solenoid Valve
UNI-D type 2 way normally closed solenoid valve, semi-direct
(direct lift) diaphragm solenoid valve, water steam oil and gas
control solenoid valve, stainless steel 304 body solenoid valve are
widely used in medical machinery, solar energy, cleaning equipment,
food machinery, welding and cutting, fire safety,
biopharmaceuticals, water Reuse, circulating water system, medical
equipment, rubber and plastic machinery, clothing equipment, drying
equipment, pharmaceuticals, HVAC, electroplating coating machinery
manufacturing and other industries. Suitable for automatic control
of water, hot water and gas.
Youtube video of 2 Way NC SUW-20 Unid Type Stainless Steel Solenoid
Valve:
Overall dimension of 2S200-20 2/2 Way NC Direct Lift Diaphragm
Solenoid Valve:
Technical data of 2S,SUS & SUW Series Stainless Steel 304
Electromagnetic Valve:
| 2S Series | Uni-D Type | PIPE SIZE | CV | ORIFICE | FLUID TEMP. (°C) | Operating Pressure kgf/ cm² (bar) |
| Water | Air | Light oil |
| 2S025-06 | SUS-6 | 1/8'' | 0.23 | 2.5mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S025-08 | SUS-8 | 1/4'' | 0.23 | 2.5mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S040-10 | SUS-10 | 3/8'' | 0.58 | 4mm | -5°C- +80°C | 0-7 | 0-7 | 0-7 |
| 2S160-10 | SUW-10 | 3/8" | 4.5 | 15mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S160-15 | SUW-15 | 1/2'' | 4.5 | 15mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
| 2S200-20 | SUW-20 | 3/4" | 8.6 | 20mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S250-25 | SUW-25 | 1" | 12 | 25mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S350-35 | SUW-35 | 1-1/4" | 24 | 35mm | -5°C- +80°C | 0-5 | 0-7 | 0-5 |
| 2S400-40 | SUW-40 | 1-1/2" | 28 | 40mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
| 2S500-50 | SUW-50 | 2" | 48 | 50mm | -5°C - +80°C | 0-5 | 0-7 | 0-5 |
Spare part removal of SUW-20 Semi-Direct Diaphragm Operated
Solenoid Valve:
Application examples of 2S200-20 Stainless Steel Body Electric
Solenoid Valve:
N/C Valve will not open
Reason 1: Inspect the valve for damage. Has it been dropped or
submerged?
Reason 2: Make sure there is a proper electrical connection
(voltage, current, frequency). Use a multimeter to test all
components.
N/C Valve will not close
Reason 1: The seal material is compatible with the medium. If the
medium is not compatible it may cause the seal to shrink or
contract.
Reason 2: Debris in the valve commonly prevent the valve from
properly sealing. This can be caused by pipe tape, dirt or hard
water deposits.
Reason 3: Make sure there is a proper electrical connection
(voltage, current, frequency). Use a multimeter to test all
components.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
