MYT Series Swimming Pool Pump Motor MYT712-2 0.75KW 1HP with Water
Dust And Vermin Resistant
Pool Pump Motor Description
Suitable for swimming pools, a high-quality water pump designed for
swimming pools
Adopting the latest design and using high-quality materials conform
to IEC standards of function, appearance, and output.
The motor has good performance, safe and reliable operation,
beautiful appearance, convenient maintenance, low noise, slight
vibration, lightweight and simple structure.
100% coil, high-quality bearing, high precision rotor, fast heat
dissipation, low energy loss, high efficiency, and energy saving
An end cover is mounted on both ends of the base, and the sliding
surface is matched between the end cover and the rotating shaft,
and a shielding sleeve is arranged between the stator and the
rotor, and the shielding sleeve is fixed to the end cover and the
base
Sufficient power to ensure the flow required for the pool water
cycle
-Good motor cooling for the motor, low power loss
-Within the cooling, low noise standard motor
-Motors with high-quality bearings, long operating life
-with reliability and durability
Mode: MYT712-2
Horsepower: 1
Voltage: 230V
Hertz: 50
Motor housing: Aluminum
Bearing: C&U
RPM:2800
Insulation: Class F
Protection: IP55
Installation: B3
Stator&Rotor: 1. Cold-rolled silicon steel sheet by high-speed
punching machine. 2.100% high-quality copper wire
Production data
| Model | Power | Voltage(V) | Frequency (HZ) | Current (A) | Power Factor | Eff(%) | Speed (r/min) | T start/Tn | Tmax/Tn |
| HP | KW |
| MYT711-2 | 0.75 | 0.55 | 220 | 50 | 3.88 | 0.92 | 70 | 2800 | 0.35 | 1.7 |
| MYT712-2 | 1 | 0.75 | 5.15 | 0.92 | 72 | 2800 | 0.35 | 1.7 |
| MYT801-2 | 1.5 | 1.1 | 7.02 | 0.95 | 75 | 2800 | 0.33 | 1.7 |
| MYT802-2 | 2 | 1.5 | 9.44 | 0.95 | 76 | 2800 | 0.33 | 1.7 |
Application
The motor with a pool pump is used for swimming pools.
The water pump is connected to the motor drive shaft, and the axial
and radial tolerances do not exceed the specified value.
Skills Requirement
1) The pool motor should be easy to overhaul and maintain, and the
design and construction of the motor and its components should be
safe.
2) The size of the pool motor should be as compact as possible, and
its electrical and mechanical structure is suitable for general
pool installation, load, and environmental conditions.
3) The pool motor can work at full load within the range of plus or
minus 10% of the rated voltage.
4) All pool motors should have thermal and current overload
protection, set inside the motor or at the starting point of the
line, providing locking rotation and running protection.
5), security protection level IP55.
Pool Pump Motor General data
| Frame size | 71 |
| Housing material | Aluminum |
| Install model | According to the standard |
| Type of feet | Removable feet |
| Net weight | 5.2 kg |
| Insulation class | FH(Standard)(Optional) |
| Protection degree | IP 55IP 56(Standard)(Optional) |
| Thermal protection | WithoutCustomizable(Standard)(Optional) |
| Rotation direction | ClockwiseCounter clockwise(Standard)(Optional) |
| Service duty | S1 |
| Vibration level | A |
| Balance | Half-key balanced |
| Cable glands | 1 - M20 × 1.5 |
| Cooling | IC 411 |
| Painting color | RAL 7024Customizable(Standard)(Optional) |
| Regulations | IEC / DIN / ISO / VDE / EN |
| Standard | IEC 60034 |
| Environmental conditions |
| Ambient temperature | From -20°C to +40°C |
| Maximum altitude | 1000 m above sea level |
Pool Pump Motor Guarantee
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by the
customer's incorrect artificial operation. In addition, after
expiration, our company provides cost spare parts for maintenance.
Our service
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
INFORMATION
Motor bearing heating analysis
(1) improper bearing coordination leads to the breakdown of the
motor bearing system quickly.
(2) currently causes ablation of bearing system components and
heating of bearing parts, resulting in a severe failure of the
bearing system.
(3) improper lubrication system leads to bearing heating due to
poor lubrication
(4) bearing heating caused by motor temperature rise or operating
environment temperature.
