Single Phase AC Asynchronous Motor with Cast Iron Housing For Air
Conditioner
Single Phase Induction Motor DESCRIPTION
YC series single-phase asynchronous motor applied to general machinery and equipment without special
requirements, such as agricultural machinery, food machinery, fan,
water pump, machine, mixing machine, air compressor.
OPERATING LIMITS
Ambient Temperature: -15°C~40°C
Altitude: not exceed 1000 Meter
Rated Voltage: 380V or any voltage between 220-1140V
Rated Frequency: 50Hz/60Hz
Protection Class: IP44, IP54, IP55
Insulation Class: B/F
Cooling Method: IC0141
Working Duty: S1(Continuous)
Humidity: Lower than 90%
Connection: Star-connection for up to 3kW; Delta-connection for 4kW
and above
PRODUCTS DETAILS
| Site conditions | Motors are suitable for the most working environment at a
temperature from -15°C t0 +40°C and an altitude below 1000 meters. |
| Insulation | The motors' insulation system is set to Class F(105K), examined by
Class B(80K), which ensures the lifespan and reliability of the
motors. |
| Motor protection | Motors can be installed with PTC, PT100 used winding and bearing
temperature measurement on request. |
| Voltage and frequency | The standard voltage and frequency is 380V 50HZ and can be set to
any single voltage in the range of 200-660V at a frequency of 50 or
60HZ. The motors work well within variations of ±5% from the rated
voltage. |
| Vibration | Motors are designed for vibration class A. Vibration class B is
available on request. |
| Duty | Continuous(S1) |
| Cooling and ventilation | The standard cooling method is totally enclosed fan cooled(TEFC)
following IC411 of IEC60034-6. Standard motors are equipped with
auxiliary plastic fans. |
| Winding | 100% Copper Wire |
| Protection class | The standard protection class is IP54/IP55, which can be used in
humid and dusty environments. Higher degrees of protection are
available. |
| Quality assurance | From the first line of production designing till the finishing
procedure, obey ISO9001 documented quality system. |
PERFORMANCE CHART
| Model | Output HP KW | Voltage
(V) | Current
(A) | Speed
(r/min) | Eff
(%) | Power
Factor | Tstart/Tn | Ist/In | Tmax/Tn |
| 220V 5OHz Synchronous Speed 3000r/min (2 Poles) |
| YC80A-2 | 0.5 | 0.37 | 220 | 3.5 | 2880 | 62 | 73.8 | 2.8 | 6.2 | 1.8 |
| YC80B-2 | 0.75 | 0.55 | 220 | 5.3 | 2880 | 65 | 76.5 | 2.8 | 6.5 | 1.8 |
| YC80C-2 | 1 | 0.75 | 220 | 6.7 | 2880 | 68 | 77.5 | 2.8 | 6.5 | 1.8 |
| YC90S-2 | 1.5 | 1.1 | 220 | 9.1 | 2880 | 71 | 79.7 | 2.4 | 7.0 | 1.8 |
| YC100L-2 | 2 | 1.5 | 220 | 11.4 | 2900 | 72 | 81.3 | 2.4 | 7.0 | 1.8 |
| Y-112M-2 | 3 | 2.2 | 220 | 16.5 | 2900 | 74 | 84.8 | 2.1 | 7.0 | 1.8 |
| YC112M1-2 | 4 | 3 | 220 | 21.4 | 2900 | 76 | 84.9 | 2.2 | 7.0 | 1.8 |
| YC112M2-2 | 5 | 3.7 | 220 | 24.8 | 2900 | 79 | 85.5 | 2.2 | 7.0 | 1.8 |
| 220V 5OHz Synchronous Speed 1500r/min (4 Poles) |
| YC80A-4 | 0.33 | 0.25 | 220 | 3.4 | 1450 | 56 | 0.6 | 2.8 | 6.0 | 1.8 |
| YC80B-4 | 0.5 | 0.37 | 220 | 4.5 | 1450 | 60 | 0.62 | 2.8 | 6.0 | 1.8 |
| YC80C-4 | 0.75 | 0.55 | 220 | 6 | 1450 | 64 | 0.65 | 2.8 | 6.0 | 1.8 |
| YC90S-4 | 1 | 0.75 | 220 | 7.7 | 1450 | 67 | 0.66 | 2.4 | 6.5 | 1.8 |
| YC90L-4 | 1.5 | 1.1 | 220 | 10.4 | 1450 | 70 | 0.68 | 2.4 | 6.5 | 2.8 |
| YC100L-4 | 2 | 1.5 | 220 | 13.5 | 1450 | 72 | 0.7 | 2.4 | 6.5 | 1.8 |
| YC112M1-4 | 3 | 2.2 | 220 | 18.5 | 1450 | 72 | 0.72 | 2.4 | 6.5 | 1.8 |
| YC132SA-4 | 4 | 3 | 220 | 22.4 | 1450 | 74 | 0.73 | 2.1 | 6.5 | 1.8 |
| YC132SB-4 | 5 | 3.7 | 220 | 26 | 1450 | 75 | 0.74 | 2.1 | 6.5 | 1.8 |
| YC132M-4 | 7.5 | 5 | 220 | 30.5 | 1450 | 81 | 0.95 | 2.1 | 6.5 | 1.8 |
Single Phase Induction Motor GUARANTEE
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by customer's
incorrect artificial operation. In addition, after expiration, our
company provides cost spare parts for maintenance.
OUR SERVICE:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
FAQ:
1. Q: What’s the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What’s the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the BL copy or 100% LC at
sight.
