MS100L1-4 3 Phase Induction Motor Squirrel Cage 3HP 2.2KW 400V 60HZ
3 Phase Induction Motor APPLICATIONS:
MS100L1-4 3 phase induction motor derives its name from the magnetic field induced by the rotor
current instead of electrical connections. It chooses the squirrel
cage rotor type because the advantage of this motor is that the
structure is simple, there is no winding on the rotor, the
maintenance cost is low, and the service life is long.
Technical Data:
| Model | Power | | Voltage(V) | Frequency (Hz) | Current (A) | Power Factor | Eff(%) | Speed (r/min) | T start/Tn | Tmax/Tn | Ist/In |
| HP | KW |
| MS100L1-4 | 3 | 2.2 | 400 | 60 | 4.8 | 0.8 | 83 | 1400 | 2.2 | 2.4 | 5 |
3 Phase Induction Motor Application:
- Mechanical equipment and transportation equipment
- Packing machinery
- Wooden machinery
- Food processing machinery
- Chemical machinery
- Textile machinery
- Construction machinery
Advantage:
The rotating speed of the three-phase induction motor rotor is less
than the speed of the rotating magnetic field. Therefore, relative
motion exists between the magnetic field and the rotor windings,
generating induced electromotive force and current and interacting
with the magnetic field generating electromagnetic torque, thus
achieving energy conversion. Compared with single-phase induction
motors, three-phase induction motor operating performance is good
and saves various materials. By different rotor structures,
three-phase induction motors can be divided into cage type and
winding type.
Test Report:
| Test No: | ZZ18372 | | | | | |
| Model | MS100L1-4 | Motor No. | |
| Rate Power | 2.2kW | Rated Voltage | 400V | | Rate Current | 4.8A |
| Rate Speed | 1630r/min | Rate Frequency | 60Hz | | Insulation | F |
| Duty | S1 | Protection | IP55 | | Connection | Ｙ |
| Standard | | Test standard | GB1032-2012 | B | Produce Date | 2018-12-14 |
| Test Items | Standard | Test Resort | |
| assured value | Tolerance |
| 1. 25℃ Average End Resistance | Ω | | | 4.3714 | |
| 2. Unload Current | A | | | 2.61 | |
| 3. Unload Current Deviation | % | | | 1.1 | |
| 4. Unload Input Power | W | | | 203.9 | |
| 5. Locked Rotor Current | A | | | 32.66 | |
| 6. Locked Rotor Current/Rate Current | Times | | | 6.84 | |
| 7. Locked Rotor Torque | N.m | | | 30.18 | |
| 8. Locked Rotor Torque/Rate Torque | Times | | | 2.48 | |
| 9. Load Current | A | | | 4.774 | |
| 10. Rate Torque | N.m | | | 12.17 | |
| 11. Max.Torque | N.m | | | 36.55 | |
| 12. Max. Torque/ Rate Torque | Times | | | 3.00 | |
| 13. Min. Torque | N.m | | | 26.51 | |
| 14. Min. Torque/Rate Torque | Times | | | 2.18 | |
| 15. Rate Speed | r/min | | | 1726.8 | |
| 16. Iron Loss(When Rate Voltage) | W | | | 91.5 | |
| 17. Mechanical Loss(When Rate Speed) | W | | | 57.4 | |
| 18. Stator Winding Loss | W | | | 178.7 | |
| 19. Rotor Winding Loss | W | | | 96.4 | |
| 20. Stray Loss | W | | | 25.5 | |
| 21. Total Loss | W | | | 449.5 | |
| 22. Rated Output Power | W | | | 2200 | |
| 23. Input Power | W | | | 2649.8 | |
| 24. Full Load Power | % | | | 82.89 | |
| 25. Full Load Power Factor | | | | 0.8 | |
| 26. Stator Winding Temperature Rising | K | | | 51.7 | |
| 27. Stator Temperature | ℃ | | | | |
| 28. Bearing Temperature | ℃ | | | | |
| 29. Cooling Medium Temperature | ℃ | | | 17.4 | |
| 30. Hot Insulation Resistance | MΩ | | | | |
| 31. voltage withstanding test | V/min | | | | |
| 32. Vibration | mm/s | | | 1.4 | |
| 33. Noise | dB(A) | | | 66 | |
| 34. Turn Check(Face to shaft side) | | Clockwise | | | |
| 35. Interturn Impact Voltage Test | V | 2500 | | | |
| 36. Over Speed Test Time 2min 1.2n | | OK | | OK | |
| 37. Short-Term Over-Torque Test 15s 1.6Tn | | OK | | OK | |
| 38. Accidental Overcurrent Test 2min 1.5In | | OK | | OK | |
| 39. r | | | | 0.9991 | |
| 40. A | | | | 0.1711 | | |
| 41. B | | | | -6.0764 | |
Load Test Report:
| Test No.: | ZZ18372 | | | | | |
| Test Items | 150% Load | 125% Load | 100% Load | 75% Load | 50% Load | 25% Load |
|
| 1. Load Current | A | 7.01 | 5.81 | 4.77 | 3.91 | 3.23 | 2.76 |
| 2. Input Power | W | 4146.05 | 3365.6 | 2649.75 | 1986.79 | 1365 | 772.66 |
| 3. Slip Ratio | % | 6.9 | 5.4 | 4.1 | 2.9 | 1.9 | 1 |
| 4. Bross Loss | W | 385.54 | 265.23 | 178.71 | 119.75 | 82.08 | 59.46 |
| 5. Aluminum Loss | W | 254.73 | 162.4 | 96.45 | 51.77 | 23.29 | 5.91 |
| 6. Miscellaneous Loss | W | 61.26 | 41.14 | 25.55 | 14.04 | 6.18 | 1.52 |
| 7. Efficiency | % | 79.51 | 81.81 | 82.89 | 83.12 | 80.6 | 71.13 |
| 8. Power Factor | | 0.853 | 0.835 | 0.8 | 0.733 | 0.61 | 0.404 |
| 9. Output Power | W | 3300 | 2750 | 2200 | 1650 | 1100 | 550 |
| 10. Mechanical Loss | W | 57.4 | 57.4 | 57.4 | 57.4 | 57.4 | 57.4 |
| 11. Iron Loss | W | 86.88 | 89.22 | 91.47 | 93.65 | 95.76 | 97.82 |
MS Installation Dimensions:
Pictures:
3 Phase Induction Motor GUARANTEE:
Guarantee for one year from shipped on board date. During the
guarantee period, our company will provide free easy-damaged spare
parts for problems caused by our quality of production or raw
material, except the damageable spare parts caused by customer's
incorrect artificial operation. In addition, after expiration, our
company provides cost spare parts for maintenance.
OUR SERVICE:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services
from designing, printing to processing. Customers can provide the
design according to your request and sample making. Also, we can
advise how to make the products according to customers' target
prices.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you A factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the BL copy or 100% LC at
sight.
