480W Line Array Speaker Sound System ,With1.4"+2x10" Neodymium
Drivers And Built-in Crossover
Quick Detail:
Full range Q1 line array speaker, fixed with neodymium drivers
1.4"(voice coil Φ 3")+2x10", 480W@8ohm, crossover mode is
PASSIVE(with built-in crossover in the cabinet, and the crossover
is fixed with AUDYN capacitors-the ones d&b, CODA, TW AUDIO and
other big brands use in their loudspeakers), compact plywood
cabinet, high quality sound, strong fiberglass horn with
dispersion(HxV) 75° x 15°, vertical dispersion of the line array
speakers can be adjusted via the flying hardware at the cabinet
sides, you can fly the speaker system for outdoors applications,
use it in fixed installation, or stack them on ground.
Description:
This line array speaker system is designed for applications with
high requirements on SPL, sound quality, throw distance, and
dispersion.This line array loudspeaker system can be used in
outdoors applications like touring concert and living show, and
indoors applications like disco, nightclub, conference and church.
Q1 is fixed with 1pcs 1.4" HF and 2pcs 10" LF neodymium drivers. The
cabinet design and cabinet dimensions are exactly the same as
original Q1 and Q-Sub. We just changed the crossover mode to
PASSIVE(with built-in crossover in the cabinet, and the crossover
is fixed with AUDYN red Q4 series capacitors-the ones d&b,
CODA, TW AUDIO and other big brands use in their loudspeakers). Q1
is one full range speaker and the impedance of each speaker is 8
ohm.
Not every application needs big brand products with so high quality
and so high price. It is not a necessarity, and not every buyer can
afford them either. More people tend to buy products high enough at
quality and stability, and lower at prices. With this kind of
system, you can satisfy the audience, the event organizer and the
customer easily, and you can get back your investment on the system
very fast.
Q-Sub is one subwoofer fixed with single 18" neodymium LF driver with
power handling capacity 600W (rms). You can fly subwoofer Q-Sub
together with Q1, you can stack the subwoofer Q-Sub on the ground
as well.
M-528B & LA-218SB. Normally, when you fly Q-Sub subwoofer together with Q1, there is
attenuation on the SPL of Q-Sub subwoofer. If you fly Q1 alone, in
order to get better sound effect, we suggest you stack dual 18"
subwoofers on the ground (for indoors applications, choose direct
reflex M-528B and for outdoors applications, choose horn loaded
LA-218SB).
System configuration:
To set up Q1 + Q-Sub + M-528B(or LA-218SB) line array speaker
system, you can choose our most popular 4-channel switching
amplifier FP 10000Q(Also model MST-4130: 4*1300W@8ohm and 4*2200W@4ohm) for Q1 and Q-Sub, 2-channel
switching amplifier FP 14000(Also model MST-2350: 2*2400W@8ohm and 2*4800W@4ohm) for LA-218SB(for outdoors
applications),or 2-channel analogue amplifier TOP-1200 for M-528B(for indoors applications). DC36(3-input, 6-output) and DC48(4-input, 8-output) digital signal processors are available for
options according to the quantity of speakers.
Let us know your requirements on the system or tell us what kind of
applications they are, we will offer you one solution---send you
one sheet with models,quantity and cost of the
products(loudspeakers, amplifiers, processors, cables, connectors,
flight cases, rack.....) for your project. Various package
available for your projects of different scale.
Black/Gray/White/Purple finish available for different
applications.
To avoid damage and scratch during transport,according to
customer’s requirement,we can put the items in flight cases.
Applications:
Touring, Concert, Living Show, Living Event, night club, disco,
theatre,and fixed installation in other venues
Specifications:
| Q1 (Crossover Mode: PASSIVE) | LA-218SB (Horn Loaded Design) |
| Components: | 1.4"+2x10"(All Neodymium Drivers) | 2x18" |
| Nominal Impedance: | 8 ohm | 4 ohm |
| RMS Power Handling: | 480 W | 1200 W |
| Frequency Response: | 45Hz-18KHz(-3dB) | 35-220Hz(-3dB) |
| Crossover Point: | 2.5 KHz | ------------ |
| Sensitivity(1W/1M): | 101 dB | 104 dB |
| Max. SPL: | 129 dB(continous),135 dB(peak) | 132 dB(continous),138 dB(peak) |
| Dispersion(HxV): | 75 °x15 ° | ------------ |
| Dimensions(HxWxD): | 308x580x410mm | 586x1156x918mm |
| Flight Case Dimensions(HxWxD): | | 820x1230x980mm |
| Net Weight(Kg): | 22 | 95 |
| Connector: | 2xNL4MP | 2xNL4MP |
Competitive Advantage:
Fixed with Neodymium drivers, PASSIVE crossover mode, high power,
high sensitivity, good sound quality, light weight, flying system
easy for operation, beautiful and compact cabinet design, economic
package
