Pipe use mesh pad demister, SS304 φ161mm custom order mist
eliminator
1. Pipe use mesh pad demister introduction,
Mesh pad demister, which are used in removing droplets entrained in
flow gas, is constructed from knitted wire mesh with a cellular
structure. The knit mesh are made into a mesh pad with determinate
thickness and diameter, through which the two phases liquid-gas or
liquid-vapor are disengaged.
From the statistic data obtained both in laboratory tests and
industrial applications, it shows that the proper designed mesh pad
demister allows a separation of liquids carried by gas with
efficiency reaching 99.9%.
2. Pipe use mesh pad demister Specifications in this case:
| Item | Value | Unit |
| Material | SS 304 | / |
| Shape & Size | Φ161 | mm |
| Mesh Thickness | 150 | mm |
| Demsiter Height | 200 | mm |
| Wire Diameter | 0.28 | mm |
| Mesh Density | 80 | kg/m3 |
| Void Fraction | 0.99 | / |
| Specific Area | 144 | m2/m3 |
| Grids | 25*3 flat bar | mm |
3. Pipe use mesh pad demister advantage,
- Prevention of air pollution
- Reduce of costly liquid lose
- Reduce of product contamination
- Improvement in process efficiency
- Minimizing product losses in re-boilers & evaporators
- Preventing carbon & metal entrainment in down stream catalyst
cracker.
4. Pipe use mesh pad demister from factory,
1. demister is tailor made to suit for specific vessel dimensions
and configuration.
2. provides wide variety of material to suit for even the most
corrosive process environments.
3. factory can supplies either mesh pad only, or complete demister
with top and bottom supporting grids for direct installation in
vessels.
4. Sectional construction for easy handling and access through man
ways.
5. Complete accessory pack including support ring and beam can be
provided when required.
5. Pipe use mesh pad demister material of construction,
| Materials | Main Application Area |
| SS304 | Water solutions, Nitric acid reduced crude petroleum fraction etc. |
| SS316L | Fatty acid reduced crude containing naphthenic acids and corrosive
chemicals |
| Synthetic fiber | For corrosive service at moderate temperature |
| PP(Polypropylene) | For corrosive service at temperature up to 70℃ |
| PTFE | For corrosive service at temperature of (-190℃, 250℃) |
| Monel | Caustic soda, dilute acid |
| Nickel | Caustic Soda, food products |
| Copper | Freon, alcohol |
| Aluminium | Nitric Acid |
6. Pipe use mesh pad demister package & shipping:
Welcome your inquiry with any questions! Here in we are always
ready to be helpful!
