2S025-08 1/4'' Normally Closed Plunger Direct Acting NBR Nitrile
Seal Stainless Steel 304 Solenoid Valve
The shown is 2S025-08 2 way normally closed plunger operated direct
acting stainless steel body solenoid valve. 2S series water solenoid valve is a direct-acting electromagnetic
valve that uses medium pressure difference. It adopts diaphragm
structure and has the characteristics of quick opening and closing,
stable performance, convenient use, high reliability and long
service life. The valve body is made of stainless steel. It has
strong anti-pollution ability and can be used for long-term use in
rivers, rivers, lakes, seas and various artificial waters. The common features of the 2S series solenoid valve as follows:
1. 2S series is direct, multiplex, connected diaphragm, conductive
and normally closed (NC) 2/2 way solenoid valve;
2. Able to be operated directly under low pressure;
3. Availability of fluid type: water, air, light oil, gas, vacuum;
4. Acceptable for customization NBR, Viton, Silicone and EPDM for
plunger and diaphragm.
Youtube video of 1/4'' 2S025-08 Direct Acting NC Stainless Steel
Solenoid Valve:
Main dimension of Normally Closed Stainless Steel 304
Elctromagnetic Valve:
Technical parameter of 2S Series Stainless Steel 304 Electric
Magnetic Valve:
| Model | 2S025-08 | 2S040-10 | 2S160-10 | 2S160-15 | 2S200-20 | 2S250-25 | 2S350-35 | 2S400-40 | 2S500-50 |
| Working medium | Air, Water, Steam, Gas |
| Body material | Stainless steel 304 |
| Seal material | NBR/Nitrile |
| Operation | Direct acting |
| Port size | 1/4'' | 3/8'' | 3/8'' | 1/2'' | 3/4'' | 1'' | 1 1/4'' | 1 1/2'' | 2'' |
| Operating pressure | 0 to 1.0mpa |
| Operating temperature | -5 to 100℃ |
| Fluid viscosity | Below 20cst |
Details enlargement of G1/4'' 2S025-08 2 Way Plunger Operated Water
Solenoid Valve:
Application examples of 2/2 Way Direct Acting Normally Closed
Solenoid Water Valve:
Brando normally closed (N/C) electric solenoid valve is constructed
with a durable stainless steel body, two-way inlet and outlet ports
with one-quarter inch (1/4") female threaded (NPT) connections, and
heat and oil resistant Viton seals. Suitable for use with hot or
cold water, gas, air, very low viscosity fluids (< 20 cst), oils
and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel.
Suitable for outdoor use. Not for use underwater. Customers chose
this general purpose valve for: do-it-yourself projects, moderate
temperature applications, water exchange for aquarium, air horn, or
bleeding moisture from an air tank.
Specifications:
Pipe Size: 1/4"
Flow Aperture: 2.5 mm
Body Material: Stainless Steel
Seal Material: NBR/Viton
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Voltage: AC110V, AC220V, DC12V, DC24V (± 10%)
Suitable Media: Air, water, oil, Diesel fuel, kerosene etc.
Operational pressure range: Air/Water/Diesel fuel/kerosene: 0-7 Bar
(0 to 101 PSI); Oil: 0-5 Bar(0 to 72 PSI)
Flow capacity: 0.23 gallons per minute (GPM) of water at 60 oF with
a pressure drop of 1 PSI
Flow value: 0.23 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature Maximum: 248 degrees Fahrenheit (120 degrees Celsius)
OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle).
While energized, under normal operating conditions, solenoid valve
will get HOT. The coil will reach a maximum temperature of about
176°F (80℃). If energized continuously for more than 8 hours the
coil may burn.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
