50 Ton Chain Bucket Elevator TB Lime Link Chain Hopper For Grain Transport

50 Ton Chain Bucket Elevator TB Lime Link Chain Hopper For Grain Transport

Introduction

Bucket elevator’s traction configuration is plate chain , which is used for vertically transporting powder , granular and block material , and also high grinding material , such as coal powder , slag , limestone , cement raw material , cement clinker , cement , coal , dry clay etc , material temperature is less than 250℃. Max. Lifting height can be 40m. It is special for cement, so we also call it cement bucket elevator.

Working Principle and Application

Hopper scoops up materials from the stone bucket below, then is lifted to the top with the conveyor belt or chain, and next it is downward rolled over bypass the wheel on the top and the materials are dumped into the accept slot now by bucket chain or hoist conveyor, and the whole process is over. The driving band of bucket elevator with driver is commonly made of rubber, and it is installed below or above the drive roller and the divert roller. The chain-drive bucket elevator is generally equipped with two parallel transmission chains, above or below which is a drive sprocket and a divert sprocket. Continuous chain or belt bucket elevator for cement is generally equipped with chassis to prevent the dust flying into the bucket elevator.

Advantages and Features

• 1. Efficient bucket elevator machine with large capacity, high lifting height.
  2. With kinds of buckets, to meet the requirement of different types of material.
  3. THG bucket elevator adopts alloy steel ring chain, after surface treating and heat treating, moderate hardness, high strength, better abrasive resistance.
  4. TDG bucket elevator adopts steel cord rubber belt, good toughness, high strength.
  5. Head, tail parts and middle housing cases with good sealing, no material and dust leaked, with no pollution.
  6. With hold back to prevent material back flow when shut down in an emergency.
  7. Bottom adopts counter weight take-up device, make itself automatic take-up, to avoid belt track slip or chain take off.
  8. Increase speed control sensor and mechanical level detector, it is matched by customized.
  9. Motor brand can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG etc;
  10. Bearing brand can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF etc.

Technical Parameter

Note: All the parameters are for reference only, we can design and manufacture as per your requirements.

Selection Conditions

For a long time, PK Machinery sticks to the company mission of “Taking great responsibilities, acting with great morals and making great achievements”, carries out production and R&D with keen market insight and rigorous scientific analysis, keeps in step with the leading standards. We understand the importance of consistency and reliability, therefore all of our equipment are designed and built to high standards, from a single machine to a complete system, PK Machineryalways configures stable System customization to reach yielding optimum performance.

Headquartered in Xinxiang City.Henan Province,China, domestic well-known screening and conveying equipment city, PK Machinery has enjoyed more than 50 steady years of successful growth, and now it has been widely acknowledged as a trustworthy and professional manufacturer in the field of bulk material handling equipment, including vibrating screen, vibrating feeder, belt conveyor, bucket elevator, screw conveyor, scraper chain conveyor and associated spare parts in complete specifications.

With series of high sophisticated production equipment, we have set up the international standard equipment production line, with production capacity and technological level coming first on the list. The modern production workshops include screening equipment workshop, conveying equipment workshop, lifting equipment workshop, cutting workshop, roller production workshop, the lathe workshopintegrate machining, fabrication,assembly, and warehouse all on one,those machinery and workshops are fully performing international technology standards, production capacity, technological level.The progressive production equipment is a microcosm of our strong production strength.

We also understand that our customers’ bulk material screening and conveying equipment must be operated at peak performance at all times, that’s why we are whole-heartedly devoted to provide customers value, achieve maximum efficiency at minimum cost and obtain the utmost productivity during the sales process. Meanwhile, PK Machinery is backed up by experienced professionals to provide guaranteed customer satisfaction, what’s more, one of the most important aspectsoffered by PK Machinery is the quick and easy provision of spare parts, in this way, there is no additional worries for customers once they choose to cooperate with PK Machinery.

We understand the 21st century is full of openness, with the rapid and extensive application of high-tech products, the communication and integration of the world have been accelerated. Since foreign trade department set up, we have actively expanded overseas markets. By 2017, our products have been exported to over 140 countries and regions including Russia, UK, USA, France, Germany, Australia, Malaysia, United Arab Emirates, Indonesia, South Africa, Iran, Chile, etc. We win highly praise and trust from domestic and worldwide customers: Baosteel Group, Wiscogroup, Fatima Group, Aker Solutions, Armstrong Flooring, Tata Group, ATS group, etc., their trust and long-term cooperation are the motivation to us to pursue professionalism, innovation, excellence and dedication so as to indispensable partner.
What's more,PK Machinery is always cooperating with the world famous suppliers with advanced technology, so as to ensure the each key part of the equipment achieves superior performance, long service span, little failure and maintenance work. There is also a important point that once the key part fails, customer can go to the local agent for free replacement or maintenance, which can save a lot of time and expense. Motor brand includes: ABB, SEW, WEG, SIEMENS, ITALVIBRAS; Reducer brand includes: SEW, SIEMENS,FLENDER, SUMITOMO; Bearing brand includes: NSK, SKF, FAG; Belt brand includes: CONTITECH, BANDO; Electrical control: SIEMENS, SCHNEIDER. However, any other brand that is not mentioned, we can customize as per your specific demand.