1.27mm Double Row Female Header Right Angle PCB Board Connector 16
Pin
| Current Rating | 1.0AMP |
| Contact Resistance | 20mΩ Max |
| Withstand Voltage | 500V AC/DC |
| Insulation Resistance | 1000mΩ Min |
| Operation Temperature | ﹣40℃ to +105℃ |
| Contact Material | phosphor Bronze |
| Contact Plating | AU over Ni |
| Insulator Material | PA9T+30％GF UL94V-0 |
Item name: female connector
1. product features: Female header connector is a kind of connector.
2. product material: PA9T/PBT/ brass or phosphor bronze insulation
material: plastic UL 94V-0.
3. scope of application: widely used in electronics, electrical
appliances, instruments in the general connection of the main
components of the current or signal transmission. Usually with the
needle supporting the use of a board to board connection. The
utility model is matched with an electronic wiring harness terminal
to form a board to wire connection.
Category
1. According to the spacing: 0.8mm, 1.0mm, 1.27mm, 2.0mm, 2.54mm.
2. According to whether it has convex points, the convex points are
divided into half convex and full convex.
3. According to the number of rows: single row, double row, three
row, four row, etc. at present, there are only four rows at most.
4. According to the installation mode, 180 degrees are represented
by s, 90 degrees by W, and SMT by T.
5. According to whether it needs to be increased or not, whether it
needs to be divided with positioning columns, there are two kinds
of positioning columns, one is the internal positioning column and
the other is the ear positioning column.
6. According to the terminal division: Y-type terminal (generally
used for plastic height), U-type terminal (generally used for
plastic height), four side ring bonding terminal;
FAQ
Q: Can I get some samples?
A: Yes,some samples are free.
Q. which payment can be accepted:
A: 1. The payment terms can be flexiable depend on the quantity and
products.
2. Usually, new customer we prefer the 100% T/T before shipping or
30%T/T advance before shipping.
Q: Can I get some samples?
A: Yes, sample order is available for quality check and market
test.
Q: What’s the delivery time?
A: It usually takes about 3~7 working days to produce the products.
