High Tear And Excellent Anti Yellowing Liquid Silicone Rubber For
Diving Supplies
Description
RH6250-50QL is platinum cured silicone rubber for silicone
products.
This silicone rubber is packaged in A:B composition at 20 kg/barrel
or 200 kg/barrel. The storage conditions are unmixed two-component
sealed and stored at room temperature. It is important to note that
this product should not be exposed to compounds containing N, P,
and S, so as not to poison the platinum catalyst and affect the
effect.
RH6250-50QL can be used to produce diving supplies articles with
high transparency and excellent rubber elastic properties.
Typical Properties
| 6250-50QL® |
| Unit | Part - A | Part - B |
| Appearance | / | transparent | transparent |
| Shore A Hardness | A | 50 |
| Tensile Strength | MPa | 8.5 |
| Elongation | % | 500 |
| Tear Strength | KN/m | 25 |
These figures are for reference only, please contact us for
details.
Mixing ratio of components A : B = 1 : 1.
Vulcanization: 150 °C / 5 min
Key Features and Benefits
1.Excellent transparency
2.Excellent strength
3.Excellent thermal stability or weather ability
4.Excellent resilience
Packaging & Storage
Available in 20kg pails or 200kg drums.
Store in a cool, dry place out of direct sunlight, use it within 12
months from the day of manufacture.
Notice
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
Applications
Because of the outstanding properties 6250-50QL® liquid silicone
rubber is particularly suitable for various breathing masks, goggles, goggles strip series products and diving accessories.
Certificate
Rui-He 6250-50QL® Liquid silicone rubber obtained the following
test certificate: RoHS, FDA.21.177, REACH, PAHS, ISO9001:2016, etc
Tips
Q: How many kgs of silicone I need to make a mold, like 1m*1m?
A: First, you change the "m" to "cm". Then the
V(volume)=100cm(length)*100cm(width)*1.5cm(height or thickness)
=15000cm3
→ the density of the liquid silicone is 1.1g/cm3→ the quantity= 15000cm3* 1.1g/cm3=16500g(16.5kg)
Q: How can I know the thickness of the silicone mold?
A: For the pouring way, if you do not have a plaster have a base to
keep its shape (like square), then we usually suggest that 2-3cm is
enough. If yes, then 1-1.5 cm is enough.
Q: Why is there not enough 25kgs silicone in the drum?
A: V=m/p. because the different of the silicone viscosity, so there
will be a little difference. When the viscosity is lower, there
will be 26kgs or more. In contrast, there will be 24kgs or little.
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices in website because prices
fluctuate for many reasons.
