AC220V 3/4 Inch Normal Close 2/2 Way Uflow Stainless Steel Body
Solenoid Valve Customized
2S200-20 AC220V voltage is an electromagnetic valve, stainless
steel, aluminum alloy, appropriate is used in the field of
circulation time longer control, adopting direct acting diaphragm
structure, the body is made of stainless steel, corrosion resistant
function.It adopts a diaphragm structure and has the
characteristics of quick opening and closing, stable performance,
convenient use, high reliability and long service life. The
water-using solenoid valve has strong anti-pollution ability. It
can be used for a long time in rivers, rivers, lakes, oceans and
various artificial waters.
ALL standard valves are supplied with Continuous Duty Coils of the
proper class of insulation for the service indicated on the valve.
It is normal for the coil temperature may become hot after being
energized for extended periods. Smoke or burning odor indicates
excessive coil temperature and the power should be disconnected to
the coil immediately.
2S200-20:
2S: 2 / 2 Way Direct Drive Solenoid Valve With Stainless Steel Body
200: Orifice Size is 20 mm
20: Port Size is G3/4 Inch
Technical data:
| Model | 2S200-20 |
| Working Medium | Air, Water, Steam |
| Operation | Direct-acting |
| Type | Normal Close |
| Orifice Size | 20 mm |
| Port Size | G 3/4 Inch |
| CV | 7.6 m3/h |
| Operating Pressure | 0~0.7 Mpa |
| Max. Pressure Resistance | 1.0 Mpa |
| Operating Temperature | -5~80℃ |
| Vlotage Range | +-10% |
Special Vlotages and Special Specifications, Please Contant Us.
Deconstruction diagram of 2S200-20
Details
More Details About 2S200-20 Solenoid Valve On Youtube:
Install and use:
1. Please refer to the user manual of the product before
installation to see whether it meets your requirements.
2, the pipeline should be cleaned before use, medium is not clean
should be installed filter, to prevent impurities interfere with
the normal work of the solenoid valve.
3, the solenoid valve is generally one-way work, can not be
installed, the arrow on the valve is the direction of the movement
of the pipeline fluid, must be consistent.
4, solenoid valve installation of the general body horizontal,
vertical upward coil, some products can be installed arbitrarily,
but when the conditions allow the best vertical, in order to
increase the service life.
5. When the solenoid valve reworks in the frozen place, it shall be
heated or heat preservation measures shall be set.
6. After the lead wire of the electromagnetic coil (connector) is
connected, it shall confirm whether it is firm or not. The contact
point of the
connecting electrical element shall not shake.
7, continuous production to work of the solenoid valve, the best
use of bypass, facilitate maintenance, do not affect production.
8. The solenoid valve after a long period of service shall be used
only after the condensate is removed; When unassembling and
washing, all parts should be put in order and then restored to
their original state.
9, there are unknown, please contact us, dedicated to your service.
Welcome to your any question and inquiry!
