SMD Tape and Reel Packing Carrier Tape for Components Collecting
and Storage
We supply high quality embossed carrier tapes and custom carrier
tapes according to customers's demand.
If you need a carrier tape to allow parts to be placed and sealed
to go onto a pick and place system, then we have options for you.
Introduction
The Carrier tape has pockets that are shaped to match the contours
of the component to be carried. The width of carrier tape is
between 8 and 104 mm,which is under the EIA standars, we also can
custom for customers. In the carrier tape, there are sprocket holes
down both sides of the tape, round with a radius of approximately
1.5 mm on one side and oval with a "radius" of 0.75 mm on the
other. These holes enable precision presentation of the pocket to
the pick and place unit.
Carrier tape size and it matched cover tape
Each carrier tape has it matched cover tape, the cover tape has the
cold sealing and hot sealing options during the components
packing,also the cover tape has the ESD options. Below is the
dimension of the carrier tape and it matched cover tape diagram.
| Carrier Tape(mm) | 8 | 12 | 16 | 24 | 32 | 44 | 56 | 72 | 88 | 104 |
| Cover Tape(mm) | 5.4 | 9.3 | 13.3 | 21.3 | 25.5 | 37.5 | 49.5 | 65.5 | 81.5 | 97.5 |
Application
The embossed carrier tapes are widely used in the surface
packaging, carrying and transmission of the surface mounting
equipments,for example, the mini PCB , IC ,LED chip, connectors,
diodes, dynatrons, resistors, conductors, capacitors, fuses,
switches, relays, resonators, radome, socket component,etc.
