2019 new design wall putty making plant automatic dry mortar mixing
plant
Product Description:
What is dry mortar:
Dry mortar is also called pre-mixed mortar, which made in the
factory by precise batching and uniform mixing. It can be used
directly just by adding water in construction site. It has
different properties though adding different additives. The demand
for dry mortar has increased rapidly due to its outstanding merit
compare to the mortar production in job-site.
Raw material of dry mortar:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite,
expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly
ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
Descriptions of MG dry mortar mixing plant:
MG series dry mortar plant is based on the latest design concept in
Europe, this production adopts the advanced computer auto-control
system, whose production capacity can reach 30-100 thousand tons
per year depend on the system configuration. The production line
consists of storage system, metering and batching system, conveying
system, mixing system, air compressor system , packaging system,
and dedusting system, etc
Mixer for continuous mixing. The finished product in conformity
with mixing accuracy requirements can be sent to the finished
products bin shortly after mixed. Moreover, there is design with
automatic rationing and packaging machine at the bottom of finished
products bin, allowing for synchronous auto-packaging operation.
Featured with easy and convenient operation, high efficiency, it
can both obviously reduce labor intensity and effectively reduce
dust pollution.
Main configuration
Electric control cabinet; Cement silo, Weighing system; Feeding
hopper; Impulse dust collector; Bucket elevator; Premix tank; Twin shaft agravic mixer; Finished product holding tank; Automatic
packaging machine; Air compresser.
It can be equipped with grinding machine and drying machine
according to requirement.
Application:
The dry mortar mixing plant can produce the following dry mortars:
Bonding mortar: Masonry mortar, wall and floor tile adhesive
mortar, anchorage mortar etc. Decoration mortar: Decorative
plaster, inner and outer wall putty, colorful decoration mortar
etc. Protection mortar: Water-proof mortar, anti-corrosion mortar,
self-leveling mortar, wear resistance mortar, thermal insulation
mortar, sound insulation mortar, repair mortar, mildewproof mortar,
shielding mortar etc.
Technical parameter of MG full automatic dry mortar mixing plant:
Model | Capacity | Occupied area | Equipment height | Manpower | Batching and packaging |
simpe dry mortar plat | 1-3T/H | 20m2 | 3-4m | 2-3 Person | Manual batching
Automatic packaging |
Improved dry mortar plant | 4-5T/H | 20m2 | 3-5m | 2-3 Person | Manual batching
Automatic packaging |
semi-automatic dry mortar plant | 6-8T/H | 50-60m2 | 6-8m | 2-3 Person | Manual batching
Automatic packaging |
Full automatic dry mortar plant | 10-12T/H | 60-100m2 | 8-13m | 3-4 Person | Automatic batching
Automatic packaging |
Full automatic dry mortar plant | 15-20T/H | 60-100m2 | 13-15m | 3-4 Person | Automatic batching
Automatic packaging |
Full automatic dry mortar plant | 20-30T/H | 60-100m2 | 13-15m | 3-4 Person | Automatic batching
Automatic packaging |
FAQ:
1, How about the investment of this project?
A: Our engineer can design the dry mortar plant as your requirement
and your budget, different dry mortar plant investment are difference.
Low capacity low cost, we will provide you cost effective solutions
as your requirement.
2, What's the difference between full automatic dry mortar plant
and Semi-automatic dry mortar plant?
A: (1) Semi-automatic dry mortar plant is cheaper than full
automatic dry mortar plant.
(2) Semi-automatic dry mortar plant do not need to equip silos
while full automatic dry mortar equip material silos.
(3) Semi-automatic dry mortar is manual feeding and automatic
weighing and packaging, Full automatic dry mortar plant is automatic feeding and automatic
weighing and packaging.
3, How many person required to operate this dry mortar plant?
A: Usually 2-4 workers are enogh to operate this dry mortar plant.
4, What equipment and services you can provide?
A: We can provide you turnkey solution of dry mortar plant from
working site planning to dry mortar machines, transportation, installation and training, formula of dry
mortars, after-sales services, life time technical support etc.
5, What is the area required for this dry mortar plant?
A: According to the capacity of the dry mortar plant, the area
required 300-100 m2.
6, What is the total power consumption (KW) of this dry mortar
plant?
A: It is 20-80W based on the capacity of the dry mortar plant.
7, What is the capacity of your dry mortar plant?
A: We have dry mortar plant with capacity 3-30T/H as your
requirement, and also we can customize the dry mortar plant as your capacity requirement.
8, How long is the guarantee period?
A: 12 months, within this period, we provide you spare parts and
services for free.
9, Can you install the dry mortar plant in my country?
A: Yes, we will send engineers to your country for guiding
installation and training your workers to operate the machine.
10, If you want to know more of our dry mortar plant, please send
us inquiry or contact us directly.
If you want to know more of our dry mortar manufacturing machine,
please send us inquiry or contact us directly.
