40mm Thick High Temp. 400℃ Flexible Insulation Gray Jacket For Gate Valve Pipe
Line
Removable insulation jackets for valves and flanges are an
effective, convenient, and low cost solution to reduce heat loss
and lower energy bills. The pipe and valve insulation line is
designed to fit an array of fittings and sizes, and can be used on
almost any application that requires thermal processing.
Unionfull’s removable insulation jacket are constructed of only the
finest materials. High density fiberglass needled mat is used as
the insulating material for most jackets, but other materials can
be used to meet your application. Silicone coated fiberglass cloth
is typically used for the inner liner and outer weather barrier.
And for UPIJG-T-25, the out layer fabric are required as PTFE
coated fiberglass fabric, which can be with stand of high
temperature up to 400 degrees. By using Nomex velcro and stainless
steel "D" rings, these insulation jacket have many built in
features to assure a good fit and easy install. Kevlar thread
increase the strength of the jacket and make it more durable.
Suitable for different temperature range, can be at -70~600 degrees
centigrade.
At present it is a high grade indurtries heat preserving material,
and widely used in warm-ventilation air-conditioning equip of
petroleum, chemical, filature, metallurgy, electricity,
construction, kiln stove, paper-making, pharmacy, shipping, etc.
Property:
1.UV resistant
2.Reduces Energy Consumption,can save 20%-45% energy in general
3.Weather Barrier
4.Prevents heat loss and unnecessary emissions
5.good chemical stability, good resistance of chemical corrosion
6.good heat maintenance,high temperature resistant: 1000-280ºC, low
temperature -70ºC
7.easy taking-off, easy installing
Construction:
| Liner layer | Silicone coated fiberglass fabric |
| Insulation layer | Fiberglass needle mat |
| Protection layer | Silicone coated fiberglass fabric |
| Thread | Kevlar |
| Fastening | Hook&Loop |
Data Sheet Of PTFE Coated Fiberglass Fabric:
| Basic fabric | Fiberglass fabric |
| Coating | PTFE 1 side |
| Total weight | 580g/m2 |
| Thickness | 0.45mm |
| Flammability | ≤25% |
| Temperature resistant | -70~400℃ |
| Tensile strength | 2000/1600 N/5cm |
Application:
Injection Molding Barrel Insulation
Exhaust pipe of engine
Military establishments
high temperature equipment
Pumps, Flange, chamber
Steam turbines, gas turbines (as turbine blankets) and compressors
Pictures:
