High Power paint rust removal 200w 500w 1000w laser cleaning
machine
(50w 100w 200w 500w optional)
As a green and environmentally friendly cleaning method, laser
cleaning technology has the following advantages. Compared with
traditional industrial cleaning, it has the following advantages.
It has become an emerging laser cleaning technology that has
attracted the attention of the automobile manufacturing, electronic
processing, mold industry, petrochemical industry and other
industries. :
1. No consumables, no chemical pollution, no noise, energy saving;
2. No contact, no grinding, no response, minimal loss to the
substrate;
3. It can remove pollutant particles below the nanometer level and
has high cleanliness;
4. Optical fiber transmission, movable operation, cleaning parts
that are not easy to reach;
5. Simultaneous cleaning and simultaneous processing to achieve
zero discharge in the cleaning process
6. Can achieve rapid cleaning of heavy pollutants and high-speed
cleaning of light pollutants
Applicable Industries of laser cleaning machine:
Auto Part, Tyre mold, Rubber Mold, High level machine tools, Rail,
Metal & Non-metal parts etc
Applicable Materials of laser cleaning machine:
Metal, Plastic, Rubber
Complete paint removal, Cleaning of large molds, Weld seam
pre-treatment
• Pre-coating surface preparation / contaminant removal
• Pre-treatment to enhance adhesive bonding, Nuclear
de-contamination
• Fast removal of rust/oxides, oil, grease & production residues
• Industrial, military, & shipyard - production intensive
de-coating
Product Description
1.Compact and versatile, the cleaning machine are designed for the
cost-effective treatment
of small areas that require gentle high precision cleaning,
de-coating and other surface treatments.
2.The basic system consists of the laser source, with controls and
cooling, a fiber optic for beam delivery and a processing head. A
simple main power supply is used for operation with a very low
energy demand.
3.NoComplete paint removal, Cleaning of large molds, Weld seam
pre-treatment• Pre-coating surface preparation / contaminant removal
• Pre-treatment to enhance adhesive bonding, Nuclear
de-contamination
• Fast removal of rust/oxides, oil, grease & production residues
• Industrial, military, & shipyard - production intensive
de-coation
Machine introduction
There is oxidation and corrosion when metals meet oxygen and water
vapor in air. It will greatly damage the metal workpiece and the
rust will spread from outside to inside and become worse and worse
as time goes on, until the whole workpiece is totally corrupted. So
rust removal is extremely important. Laser rust removal uses not
chemical agents or mechanical polishing, so it is faster and safer.
100W Fiber Laser rust removal Machine is a new generation of
industrial surface cleaning laser system. It adopts the advanced
laser source, laser optical scanners and control system to meet the
requirements of metal surface cleaning process.
Features
1. fiber laser high power laser cleaning machine
2. Non-contact cleaning, no damage to the parts matrix.
3. accurate cleaning, can achieve precise location, precise size
selective cleaning.
4. do not need any chemical cleaning liquid, no consumables, safe
and environmental protection.
5. simple operation, power can be hand-held or with the robot to
achieve automated cleaning.
6. cleaning efficiency is very high, save time.
7. Laser cleaning system stability, maintenance-free.
Specifications:
| Model | CY-C60 | CY-C100 | CY-C200 | CY-C500 |
| Laser source | Fiber | Fiber | Fiber | Fiber |
| Laser Power | 60W | 100W | 200W | 500W |
| Fiber cable L | 3 M | 3 M | 5 M | 10M |
| Pulse Energy | 1.5 mJ | 1.5 mJ | 2 mJ | 50 mJ |
| Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
| Frequency | 50-500KHz | 50-200KHz | 20-50KHz | 10-50KHz |
| Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
| Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
| Cooling | Air cooling | Air cooling | Air cooling | Water cooling |
| Dimension | 450*350*500 | 650*350*560 | 900*600*1100 | 1600*1100*1800 |
| Weight | 30Kg | 40Kg | 120Kg | 300Kg |
| Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
| Optional | Manual | Manual | Manual | Manual |
| Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
| Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |
