8.7/15 KV Medium Voltage Three Cores Power Cable (Armoured) , XLPE
Insulated Cable according to IEC 60502-1
Description:
8.7/15KV XLPE Insulated Cables (Armoured)
IEC60502,IEC60228,GB/T 12706.1-2008
CE,CCC,KEMA,ISO
Construction:
Conductors:Copper or Aluminium conductor, round standed or Shaped,
Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round
conductor, Class 1 as per IEC 60228, BS EN 60228 can also be
supplied upon request.
Noted: Insulation color as per standards or customer requirement.
Cable Parameters:
Three core 8.7/15kv with galvanized steel tape armo
| Normal cross sectional area(mm²) | Appro conductor dia(mm) | Nom insulation thickness(mm) | Copper tape thickness(mm) | Copper wire screen area(mm²) | Appro. Insulation dia(mm) | Nom armor thickness(mm) | Nom sheath thickness(mm) | Appro overall diameter(mm) | Appro weight(kg/km) |
| CU | AL |
| 25 | 6.05 | 3.4 | 0.1 | 16 | 16.5 | 0.5 | 2.5 | 49 | 3800 | 3300 |
| 35 | 7.10 | 3.4 | 0.1 | 16 | 17.5 | 0.5 | 2.6 | 51 | 4300 | 3600 |
| 50 | 8.25 | 3.4 | 0.1 | 16 | 18.7 | 0.5 | 2.7 | 54 | 4900 | 4000 |
| 70 | 9.90 | 3.4 | 0.1 | 16 | 20.3 | 0.5 | 2.8 | 58 | 5900 | 4600 |
| 95 | 11.7 | 3.4 | 0.1 | 16 | 22.1 | 0.5 | 2.9 | 62 | 7100 | 5300 |
| 120 | 13.1 | 3.4 | 0.1 | 16 | 23.5 | 0.5 | 3.0 | 66 | 8100 | 5900 |
| 150 | 14.3 | 3.4 | 0.1 | 25 | 24.7 | 0.5 | 3.1 | 69 | 9200 | 6400 |
| 185 | 16.3 | 3.4 | 0.1 | 25 | 26.7 | 0.5 | 3.3 | 74 | 10900 | 7400 |
| 240 | 18.7 | 3.4 | 0.1 | 25 | 29.1 | 0.5 | 3.4 | 79 | 13100 | 8500 |
| 300 | 20.9 | 3.4 | 0.1 | 25 | 31.3 | 0.5 | 3.6 | 86 | 16400 | 10600 |
| 400 | 23.7 | 3.4 | 0.1 | 35 | 34.1 | 0.8 | 3.9 | 93 | 19700 | 12300 |
Application:
These cables are used for electricity supply in low voltage
installation system, They are suitable for installation in indoors
and outdoors, in cable ducts, under ground, in power and switching
stations, local energy distributions, industrial plants, where
there is no risk of mechanical damage.
Standard:
Basic design to IEC 60502-1, IEC 60228,BS EN 60228
China: GB/T 12706.2-2008
Other standards such as BS7870,DIN and ICEA upon request
Certificates:
CE, ROHS,KEMA and more others at request
Insulation:
XLPE material and thickness shall be as per IEC 60502 or BS 5467
rated for 90°C continuous operation.
Colour Code Colour Code (1):
1 Core: Red or Black; 2 Cores: Red, Black; 3 Cores: Red, Yellow,
Blue;
Assembly /Inner Sheath:
Two, Three or Four insulated conductors are laid-up together with
non-hygroscopic fillers and the assembly is bedded with an extruded
layer of PVC. In case of non-armoured cables, this layer may be
omitted.
Armour:
Aluminum/Galvanized Steel Wires applied helically over the bedding
as per IEC 60502 or as per BS 5467, BS 6346. Single core cables
shall be Aluminium wire armour. Aluminum/Steel Tapes applied
helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath:
Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1
or Type 9 as BS 6346/5467.
Special type of PVC sheathing material such as Fire Retardant PVC,
Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil
Resistant PVC are available on special request. Also, special
sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE are
available on request.
Fire Performance of Cable Sheaths:
Cables can be supplied with special flame retardant PVC outer
sheath to comply with the flame test requirements of IEC
60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply
cables with Low Smoke Halogen Free (LSHF) material according to IEC
60502-1, BS 7211, BS 6724 or other equivalent standards.
