XY-wt polyester silicon carbide sanding Jumbo Roll
Quick Detail:
WEEM 1125, Silicon carbide grain, XY-wt Cloth Backing Abrasive,
designed for wide use in wood panels, glass, metal, etc. It has
XY-weight waterproof polyester backing bond with silicon carbide
grains, it is the most economic cloth backing abrasive to sand the
wood panels.
Description:
We understand the company's need for economic production, in order to survive in these competitive environments. Just
enough but cost less in sanding are most wanted under this
environment.
We keep all aspects in mind and develop an entry-level product for
wide belt sanding in the panel industry - WEEM 1125 SIC XY-CLOTH
ABRASIVE. It is built with fast cut silicon carbide grains, resin
over resin, close coated on stiffness XY-wt polyester backing while
keeping all the cost low.
Silicon carbide is a very hard and crystal structure that produces
fine straight-edged grind lines. It is superior for its ability to
penetrate with light cutting pressures. SiC is primarily used for
grinding nonferrous materials such as brass, copper, bronze, and
wood, glass, rubber, and plastics. It is also used to finish
polyurethanes, primers, lacquers, and sealers.
A closed coat product has a higher number of abrasives cutting
points per square inch and results in a higher stock removal rate
and a long time before the abrasive wears out. Normally results in
a better finish.
Applications:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Specifications:
| Backing: | XY-weight polyester |
| Coated: | Close coated |
| Bond: | Resin over resin |
| Grain: | Silicon Carbide |
| Grit: | P24~P240 |
| Width: | 1400mm/54” |
We offer 2 colour backing, RED and BLACK.
Competitive Advantage:
Durable stiffness polyester backing for pressure sanding, good
grinding, works well on plywood, and for board sanding, glass
sanding, etc. Decent performance, economic material for
price-sensitive need.
Tag:
Cloth abrasive, silicon carbide, Sic, sanding cloth jumbo roll.
