SMD General Purpose Rectifier Diode S1M Surface Mount Rectifier 1A
1000V
Feature
The plastic package carries Underwriters Laboratory Flammability
Classification 94V-0
Idea for printed circuit board
For surface mounted applications
Glass passivated Junction chip
Built-in strain relief, ideal for automated placement
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for
consumer, automotive, and telecommunication.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
| TYPE NUMBER | SYMBOL | S1A | S1B | S1D | S1G | S1J | S1K | S1M | Unit |
| Maximum Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=75 C | IF(AV) | 1.0 | A |
Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) | VF | 30 | V |
Maximum DC Reverse Current Ta=25°C at Rated DC Blocking Voltage Ta=125°C | IR | 5.0 200 | mA mA |
| Typical Junction Capacitance (Note 1) | CJ | 15 | pF |
| Typical Thermal Resistance (Note 2) | Rè(ja) | 30 | °C /W |
| Storage and Operation Junction Temperature | TSTG,TJ | -65 to +150 | °C
|
Drawing:
Why choose us?
1. ISO9001:2008 certified factory
2. 20 years rich experience in the diode production
3. Strict quality control, achieve customer's maximum satisfaction
4. The Annual production capacity is over 2 billion
