Safety LifePO4 Lithium Battery Lithium Iron Phosphate Rechargeable
Battery
Model: 12V 200AH
Dimension: 210mm*190mm*180mm
Parameter:
working environment:-20℃-60℃;Lithium iron phosphate battery:2P4S
Charge cutoff voltage:14.4V;Discharge cutoff voltage:9.6V; working
current:80A; charge current:40A; plastic shell
Application: Electric car, electric wheelchair, power
Basic Performance
(1) Output with high magnification: Standard discharge current is
0.5C-1.0C, instant impulse discharge current is 10C for 2 seconds.
(2) Good performance under high temperature, it could work under
65°C temperature.The battery structure is safe and good.
(3) Good performance under low temperature, discharge capacity in
no less than 90% of rated capacity when discharging with 1C under
-20°C; no less than 70% of rated capacity with 0.33C.
(4) Good safety performance:When the pressure inside the battery is
too large, the one-way safety valve will release gas and heat to
make sure battery perform well. When the internal pressure reaches
a certain level, the valve will be open immediately which can
protect the battery from burning and explosion.
(5) Good cycle life time, the discharge capacity is still over 80%
after 3000 cycle times of single cell (80%DOD).
(6) It can fast charging. It could be charged to 80% within 0.5h
and charged full with 1h.
(7) Low cost.
(8) No pollution during manufacture and usage.
Matters Needing Attention
(1) Please check if spare parts are completed when open the package
and read the operation manual carefully.
(2) Do not make the battery Short Circuit,do not over charge and
discharge.
(3) Please charge the new battery to full capacity before discharge
for the first use.
(4) The battery pack is fixed with plate and strip before delivery,
do not disassemble the plate and strip when using the battery.
(5) Checking the voltage of battery, normally it is 3.2V-3.3V.
(6) Fix BMS for battery pack and protect single cell to avoid over
charge and over-discharge.
(7) Rivet or screw is used for battery connector.
(8) Please use copper part to connect battery packs and fix with
hydraulic pressure plier. We could also provide the relevant
connection which fixed with screws.
(9) The charger used should be approved by our company in order to
match with our lithium batteries.
(10) It will shorten battery cycle lifetime and damage battery due
to overcharge and over-discharge if not do according to the above.
It won’t be within our company warranty.
| | Number | HY00073 |
| Version | A0 |
HYLF/12/200-001 Battery pack specification | Date | 2019-5-7 |
| 1．Basic characteristics | Product picture |
Product name | Industrial lithium battery | Batteries:3.2V100AHLithium iron phosphate aluminum shell 3.2V100AH
Shell material: epoxy resin board packaging, optional sheet metal,
plastic shell, aluminum alloy, etc.
.In the above figure, the battery case is a lead-acid plastic case. |
product code | HYLF/12/200-001 |
| L x W x H | 521mm*238mm*218mm |
| Rated voltage | 48VSeries structure |
| Rated Capacity | 200Ah |
| Serialization | 2P4S |
Internal resistance | ≤100mΩ |
| Discharge cutoff voltage | 9.6V | Shell color
☑ Sub black
□ Bright gray
□ +Fruit green + bright gray two-color
□ White
□ Blue thermoplastic film
Charging and discharging interface □ Wall terminal
□ Anderson
□ Navigation plug
□ Positive and negative lines
☑ Pole
□ Hardware contact |
| Charging protection voltage | 14.4V |
Max.charging voltage | 14.6V |
Max. charging current | 40A |
Maximum discharge current | 80A |
Peak current | 150±5A 2S |
Rated discharge current | 60A |
| Charging method | CC/CV |
|
weight | 27.3Kg |
Operating temperature
| Charging | 0～45℃ |
Discharge | -20～55℃ |
60-80%SOC , 2 Storage temperature 60-80% SOC storage, need to
recharge every 2 months |
-10～35℃ |
C1 Cycle life Cycle life
| 1500 Times
|
| price | RMB:¥ 00.00 |
Delivery period | 25 Working day |
