Non-Pressure Type Automatic Welding Machine Solar Water Heater
Related Machine
1. CNC Turret Punch
Performance characteristics:
1) Standard automatic CNC punching machine;
2) Equipped with the company's newly upgraded dedicated system,
which can realize on-site programming and background programming;
3) Equipped with RS232 standard interface, network card, which can
be easily connected and communicated with other computers, local
area networks and the World Wide Web;
4) Industrial grade brand computer control, anti-vibration,
anti-interference, simple operation and friendly interface;
5) 80G hard disk can realize super limited storage files;
6) Pulse encoder semi-closed loop feedback;
7) Taiwan brand servo drive and motor;
8) Taiwan imported precision large lead ball screw, which better
guarantees high processing precision and work efficiency;
9) Taiwan imported precision linear guides to ensure higher
precision and longer life;
10) Brand coupling to ensure durability and high correction factor;
11) AutoCAD graphics automatic conversion;
12) The CAD library is provided with a mold library selection, and
the pattern can be previewed in the CAD file;
Working Sketch:
2. L2000mm Computer Longitudinal Seam Automatic Welding Equipment (gantry type)
Working conditions:
1) Cylinder diameter: 100-500mm
2) Workpiece thickness: 0.4-1mm
3) Maximum barrel length: L=2000mm
4) Material: stainless steel, cold (hot) tie board
Equipment configuration:
1) L2000mm longitudinal seam welding machine 1 (including: cooling
copper strip welding trolley electrical control system).
2) One Panasonic 400 welding machine.
3) One automatic welding torch.
4) With back gas protection system and water circulation cooling
system.
5) The transmission part is the top-grade Taiwan silver linear
guide.
6) Electrical programming is fully imported.
7) The electrical part of the warranty period is one year.
3. L2000mm Automatic Double Head Four Wheel Biting Machine
Technical parameters, requirements:
1) Rated voltage: 380VAC 50HZ
2) Rated power: 11KVA
3) Compressed air pressure: 0.6mMpa
4) Equipped with power:
Motor: Y132M2-6
Electromagnetic clutch brake: DL25-160
Propulsion cylinder: SC100×150-TG
Brake cylinder: SC80×25
5) The transmission part is the top-grade Taiwan silver linear
guide.
6) Electrical programming is fully imported.
7) The electrical part of the warranty period is one year.
Working Sketch:
4. Fully Automatic Air Pressure Pulse Straight Seam
The equipment introduction:
The equipment can weld lap welding of stainless steel and carbon
steel, and has stepless adjustment of parameters such as pulse
frequency, current magnitude, welding speed and pressurization
time. This device has time control and "automatic stop welding"
function.
Technical parameters:
Model specification: | FN-35KVA | FN-75KVA |
Rated capacity (KVA): | 35 | 75 |
Secondary voltage adjustment range (V): | 2.0-3.7 | 2.72-5.44 |
Rated load duration (%): | 50 | 50 |
Welding steel plate maximum (MM): | 1+1 | 2+2 |
Welding speed (m/min): | continuous stepless adjustment
|
Compressed air pressure (Mpa): | 0.4-0.8 |
Related equipments:
