Dia3.175mm Tungsten Carbide Drill Blanks / Carbide Round Rod For
Mico Drill
Product information:
1. Grade: YL10.2, YG12X or tohers
2. Size: Diameter 0.5~32mm, cut to any length.
3. Finish: Ground to h5 / h6 tolerance
Features of tungsten carbide rods:
1.100% virgin raw materials with ultrafine partical size
2. HIP sintered, the structure of tungsten carbide is more uniform,
more dense, the TRS can be raised more than 20%
3. High precision, high stability and excellent performance, can
meet high quality requirement.
4. Excellent abrasive wear resistance leads to long tool life.
5. Competitive price and Fast delivery
Application:
Widely used for making various kinds of carbide solid tools, such
as reamers, twist drills, end mills, thread taps, etc. Suitable for
machining cast irons, stainless steel, nickel based alloys,titanium
alloys, etc.
Physical Properties:
| Grade | Density g/cm3 | Hardness HRA(hv) | T.R.S (M Pa) | Performances &applications recommended |
| YL10.2 | 14.5 | 92.5 | 3800 | Wear resistance and strength comparatively higher,suitable for
processing cast iron, non-ferrous metal and non-metalloid
materials. |
| YG6 | 14.9 | 89.5 | 2150 | Good Wear resistance, used for hard wood,processing original
wood,aluminum section bar,brass rod and cast iron. |
| YG6X | 14.9 | 92 | 1900 | With fine grain size,Good Wear resistance, used for hard
wood,processing original wood,aluminum section bar, |
| YG8 | 14.6 | 89 | 2320 | Suitable for the roughening of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG11 | 14.4 | 87.5 | 2260 | Medium grain, for wear parts and mining tools |
| YG12X | 14.1 | 92-92.5 | 3800 | .It is recommended for making conventional tools,such as twist
drill,end mills,screw taps,gun drill,ect. |
| YG15 | 14.1 | 86.5 | 2400 | Medium grain, for mining tools, cold heading and punching dies |
| YS2T | 14.45 | 92.5 | 2800 | Fine carbide,high wear resistance,high bending strength,high
resistance to bonding, high thermal strength.Machining of
refractory alloys, stainless steel and high manganese steel
etc.Mainly used for disc cutter and other tools |
| YNi8 | 14.6 | 88.5 | 1710 | This grade with 8% nickel binder, it has good wear resistance&
corrosion resistance performance ,especially used for high pressure
environmental , also good for cutting the titanium alloy. |
Other grade is also available. we also can customize composition
for you.
Tungsten Carbide Rod Features
- Manufactured with good quality tungsten carbide material
- Dimension: Dia10/12/14*100/150/200/330mm any length can be cut
- Tolerance: Ground h6/h7..., blank(+0.3/0.5mm) based on requirement
- Type: Solid round bar
- Performance: good wear resistance and toughness, corrosion resistance, high
temperature resistance,stable chemical properties.
- Main application: is for making PCB drills, drills,endmills and reamers, wear parts,
and stamping dies, measuring tools.
- Anti-deformation and deflection.
- Produces tungsten carbide rods with extrusion equipment and HIP
sintering furnace
- 100% inspection before shipment which garantee good quality
- Customized: accepted
Our common size models:
Size range(DiaXL mm) | Tolerance |
D(blank, mm) | D (ground, mm) | L(mm) |
Dia(0.4-5)x330 | +0.3/+0.4 | h6/h7 | 0/+2 |
Dia(6-20)x330 | +0.3/+0.6 | h6/h7 | 0/+2 |
Dia(21-40)x330 | +0.5/1.0 | h6/h7 | 0/+3 |
| We are able to help you customized various diameter and length
carbide rod |
Our Packing of tungsten carbide rod
1. outside packing: carton or plywood case
2. inner packing: Bubble wrap and small box
Product Show
