KWS-800 Online Multi-Parameter Water Quality Sensor
Introduction
The Kacise KWS-800 series of multi-parameter water quality sensors
(seven optional parameters) are designed in an all-in-one
configuration. Each sensor has a waterproof connector. Calibration
data is stored in the sensor for field calibration and replacement.
Up to 6 Kacise digital sensors can be connected at the same time,
with optional fluori-dissolved oxygen, four-electrode conductivity,
fiber turbidity, digital pH,digital ORP, chlorophyll and oil in
water sensors. Equipped with an automatic cleaning device to
eliminate air bubbles and prevent microbial growth, it can easily
meet the needs of various water environment monitoring such as
rivers, lakes, oceans and groundwater. Extremely reliable, it can
run for months without maintenance in an unattended environment.
Feature
Digital sensor, RS485 output, support MODBUS.
All calibration parameters are stored in the sensor, each with a
waterproof connector for easy insertion and removal.
Equipped with automatic cleaning device, it can effectively remove
the surface contamination of the sensor, prevent the growth of
microorganisms, more accurate and lower maintenance.
Optional fluorimetry dissolved oxygen, four-electrode conductivity,
fiber turbidity, digital pH, digital ORP, chlorophyll, water oil
and ammonia nitrogen.
Sensor for long-term online monitoring.
All-in-one structure design, can connect six probes at the same
time and measure seven parameters.
Technical Specifications
| Fluorescent dissolved oxygen probe | Range | 0-20mg/L |
| Accuracy | ±0.3mg/L |
| Resolution | 0.01mg/L |
| Fiber turbidity probe | Range | 0-1000 NTU |
| Accuracy | <5% or 0.3NTU |
| Resolution | 0.1NTU |
| Four-electrode conductivity probe | Range | 1us/cm-200ms/cm | 1us/cm-100ms/cm |
| Accuracy | 1% FS |
| Resolution | 0-1000uS/cm; 0.1uS/cm; 1mS/cm-100mS/cm |
| Chlorophyll sensor | Range | 0~400 ug/L or 0~100RF |
| Accuracy | 0.1 µg/L |
| Resolution | 0.1 µg/L or 0.1% RFU |
| Digital pH probe | Range | 0-14pH |
| Accuracy | ±0.1pH |
| Resolution | 0.01 |
| Digital ORP probe | Range | -999~999mV |
| Accuracy | ±20mV |
| Resolution | 1mV |
| Oil-in-water sensor probe | Range | 0-500ppb or 0-5000ppb |
| Accuracy | 5% |
| Resolution | 0.1ppb |
| Multi-parameter sensor otherinformation | Power supply | 12V ±5% |
Operating temperature |
0~50℃ |
| Self-clean brush | optional |
| Current | 100mA |
| Output | RS485 |
| Cable length | Standard 10m, customizable 5m, 15m and 30m |
| IP Grade | IP68 |
Application example
Certificates
Company information
Xi'an Kacise Optronics Co., Ltd. was founded in 2000, is located in
Xi'an, Shaanxi Province, China, is a professional engaged in
instrumentation and sensors, R & D, production, sales as one of
professional high-tech enterprises, we have our own production
workshop and central laboratory. Factory building area is about
3000 square meters, with production of more than 30 employees, 8
engineer, 6 inspectors, 10 saleman, 5 for customer service, is this
industry, we are one of the strong technology manufacturers with
varieties specification.
When the company set up, we began to focus on the coordination of
military supplies production, achieved GB/T19001-2008/ISQ9001:2008,
GJB 9001B-2009 certification. When our company is running mature
and stable, in 2008, we began to develop our business. Based on the
production of military products quality control, we developed a lot
of sensor products, such as a pressure sensor / transducer /
sensor, level transmitter / ultrasonic level meter / ultrasonic
flow meter, inertial navigation products, IMU, gyroscope,
accelerometer etc.
