Quality surface lightweight titanium clad aluminum with high
temperature resistance
Titanium clad aluminum material belongs to the combination of
non-ferrous metal and non-ferrous metal materials. ZEGOTA adopts
innovative technology, high-end equipment and high-quality raw
materials to develop and produce high-quality titanium clad
aluminum plate & strip with leading high temperature resistance,
lightweight and high strength.
Advantages:
1. Lightweight: Titanium density of 4.5g/cm3 and aluminum density of 2.7g/cm3. Titanium clad aluminum is the most lightweight and corrosion
resistant material.
2. High Strength: Aluminum has superior mass-strength ratio. In
lightweight design, titanium clad aluminum make full use of the
high strength properties of aluminum.
3. High te1660℃, boiling point 3287℃, as a clad material, can
withstand ex mperature resistance: Titanium melting point treme
high temperature in surface contact.
Application:
1. Aerospace Industry: At the beginning of aircraft and rocket, the
problem of high temperature and body weight caused by surface
friction has not been solved. After the birth of titanium clad
aluminum, the problem has been solved thoroughly because of its
high temperature resistance and lightweight characteristics.
2. Naval industry: Titanium clad aluminum are widely used in marine
engineering due to their corrosion resistance, high strength and
non-toxicity. Submarine field, such as submarine pressure hull,
water jet propeller, sea water pipeline and other related
equipment.
3. Medical industry: Titanium has the characteristics of
non-toxicity, light weight and corrosion resistance. Aluminum has
the characteristics of light weight, high strength and easy
processing. At present, titanium clad aluminum are used in medical
devices such as artificial joints, cardiac pacemakers,
cardiovascular stents and so on.
Parameter:
| Clad material | Titanium | Titanium | Aluminum | Titanium |
| Aluminum | Aluminum | Titanium | Aluminum |
| Titanium | / | / | / |
| Thickness(mm) | 0.01-4.0 | 0.01-4.0 | 0.01-4.0 | 0.01-4.0 |
| Width(mm) | 5.0-1500 | 5.0-1500 | 5.0-1500 | 5.0-1500 |
| Tensile strength(MPa) | 150-180 | 250-320 | 150-180 | 250-320 |
| Yield strength(MPa) | 120-160 | 230-300 | 120-160 | 230-300 |
| Elongation(%) | ≥20 | ≥10 | ≥20 | ≥10 |
