SR292 Educational Equipment Technical Teaching Equipment
Experiments With A Radial Compressor
1. Description
Radial compressors are used to compress gases. The medium is drawn
in axially to the drive shaft by the rotation of the rotor and
flows through the rotor rotating at high speed. By means of
centrifugal force, the medium is accelerated towards the outer edge
and is compressed in this manner.
The experimental unit provides the basic experiments to get to know
the operating behaviour and the important characteristic variables
of radial compressors.
features a two-stage radial compressor with variable speed via a
frequency converter, an intake pipe and a delivery pipe. The intake
and delivery pipes are transparent. A protective plate placed in
front of the inlet of the intake pipe prevents larger objects from
being drawn in or the clogging of the intake opening. The air flow
is adjusted by a throttle valve at the end of the delivery pipe.
The experimental unit is fitted with sensors for pressure,
temperature and speed. The flow rate is determinated via
differential pressure measurement on the intake nozzle.
2. Technical details
Specification
Functioning and operating behaviour of a radial compressor
Two-stage radial compressor with drive motor
Variable speed via frequency converter
Transparent intake and delivery pipes
Throttle valve for adjusting the air flow in the delivery pipe
Protecting plate at air inlet for undisturbed air flow
Determination of flow rate
Display of differential pressures, flow rate, speed, electrical
power consumption and hydraulical power output, temperatures and
efficiency
Due to integrated microprocessor-based instrumentation no
additional devices with error-prone wiring are required
Technical data
Intake pipe
Inner diameter: 44mm
Delivery pipe
Inner diameter: 34mm
Two-stage radial compressor
Power consumption: 1000W
Speed: 1000...16000min-1
Max. volumetric flow rate: 180m3/h
Max. pressure difference: 235mbar
Measuring ranges
Differential pressure (stage 1 / stage 2): 0...350mbar
Flow rate: 0...120m3/h
Temperature: 2x 0...100°C
Speed (compressor): 0...21000min-1
Electrical power consumption: 0...1000W
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
Product Details and Warranty
We supply suitable spare pats according to experiment requirement,
our products take aluminum structure, A4 paper dimension aluminum
and plastic hanging box structure.
We supply 3 years warranty time.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with
pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Training Room Photo
Company Information
We supply professional educational training equipment and technical
teaching equipment, which has been widely applied in Engineering
Universities, Polytechnics, Technical Institute, Vocational Schools
as well as Industry workforce Development Programs and Training
Center. Our products allow students to learn and experiment through
valuable hands-on experience, and the technology covered by our
training equipment provides knowledge, experiments and didactic
skills development that are of critical importance to today´s and
tomorrow´s careers.
Photo for Clients Visiting Factory
Service
We supply supply7*24 hours service, customer design service, OEM
service, buyer label service. With professional engineers team and
sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
| No. | Feature Name | Details |
| 1 | Customer design | Yes |
| 2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client
requirements |
| 3 | Package | Plastic film+ carton+ Fine plywood |
| 4 | Products standard | International didactic equipment standard |
| 5 | Application range | Educational equipment for university, college, vocational training
centers |
| 6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
| 7 | Self owned brand | Shouldshine, SSEDU, JSS. |
| 8 | Production time | From 10 days to 60 days according to different items
|
