Hanging System Office Operable Movable Wall Temporary Sound Proof
Partitions Philippines
Temporary sound proof partitions details:
Temporary sound proof partitions doesn’t need track on the floor,
we hang the track on the ceilings and it can be at the same color
with the ceiling decoration. It won’t affect the whole decoration
style. We can add single or double doors on the panel for
convenience. Many different finishes are available to meet customer
different requirements and get different decoration effects.
There is sound insulation rubber around each panel, which can help
to insulate the sound going through. The operation way is much
easier. It’s better than the old ways which using spring. The
temporary sound proof partition is widely used in exhibition
center, hotel, shopping malls, school, multi-function hall, banquet
hall, conference room, training room, etc.
The temporary sound proof partitions panel is made of high density
aluminum frame, special made rubber, excellent sound insulation
cotton, finish board, etc. The finish panel is flat and hard; The
finish panel is inserted in the aluminum track, assembled with
multi-direction wheels. The panel can be stored in many different
ways. Temporary sound proof partitions is flexible, artistical and
can be moved freely. And it has sound insulation, heat insulation
and fireproof function.
Technical Information
| Model | 65 temporary sound proof partitions | 85 temporary sound proof partitions | 100 temporary sound proof partitions | Ultrahigh temporary sound proof partitions |
| Panel Thickness | 65 MM | 85 MM | 100mm | 100mm |
| Panel Width | 680mm-1210mm | 680mm-1230mm | 680mm-1230mm | 680mm-1230mm |
| Panel Height | 2000mm-4500mm | 3000mm-6500mm | 5000mm-8500mm | 7000mm-17000mm |
| Frame | 6063 T6 Aluminium | 6063 T6 Aluminium | 6063 T6 Aluminium | 6063 T6 Aluminium |
Acoustic alreduction coefficient(db) | 32db | 45db | 60db | 60db |
Hermetic flex distance(mm) | 45mm | 45mm | 45mm | 60mm |
| Weight(kg/m) | 17,19,20,24 | 24,25,28,38 | 40,45,48,55 | 60,60,60,60 |
| Faceplate Material | Class-fibr board, Melamine decorative lamminate board, Gypsum board,Color steel plate,Fiberboard, Tempered glass | Class-fibr board, Melamine decorative lamminate board, Gypsum board,Color steel plate,Fiberboard, Tempered glass | Class-fibr board, Melamine decorative lamminate board ,Gypsum board, Color steel plate, Fiberboard, Tempered glass | Class-fibr board, Melamine decorative lamminate board, Gypsum board,Color steel plate,Fiberboard, Tempered glass |
| Panel Surface Finish | Anodizing, electrophoresis, Powder coating; Wooden grain or customize surface treatment | Anodizing, electrophoresis, Powder coating; Wooden grain or customize surface treatment | Anodizing, electrophoresis, Powder coating; Wooden grain or surface treatment | Anodizing, electrophoresis, Powder coating; Wooden grain or customize surface treatment |
Temporary sound proof partitions installation
1. Please designate the responsible person before construction and
leave contact information to facilitate communication between the
two parties on construction logistics.
2. If the ground has been finished before the track construction,
if the carpet, floor tiles, floor, etc. have been laid, you need to
do ground protection to prevent the welding sparks from damaging
the ground.
3. You need to provide the height of the shed after the decoration
is completed. We will determine the height of the track
installation according to this height.
4. Because we need to calculate the size of the hanging track, you
need to provide the net size of the finished wall and the pillar.
We will hang the track according to this size.
5. After the track suspension is completed, the reserved wall size
given by you cannot be changed. Because we calculate the
construction according to this size, if the size is changed, the
door panel will not operate.
6. After the track suspension is completed, our construction
personnel will fill in the dimensional confirmation letter to
provide accurate data for the production of the wallboard. You need
to specify the person in charge of the site to confirm.
7. The temporary sound proof partitions should be horizontally
perpendicular to the ground directly below the track, and the error
should not exceed 1cm.
8. If there are other constructions at the same time, please do not
pierce the foreign objects such as nails and insert them on the
installed rails. This will cause the door pulleys to not run in the
track.
9. Each group of tracks will have a “raw mouth”, which will be
removed before installing the temporary sound proof partitions
panel, and then installed after the door panel is installed. This
"raw mouth" cannot be sealed.
10. In order to facilitate future maintenance and maintenance,
please reserve the inspection port near the ceiling track to
facilitate the maintenance personnel to enter the inspection port
for product maintenance and maintenance.
11. If you need to improve the sound insulation effect of the
product, after the track is hung, you can make sound insulation
between the track and the original shed.
12. After the temporary sound proof partition is hung, it needs to
be debugged. Do not use the temporary sound proof partitions panel
before debugging the door panel, otherwise forcible use will result
in damage to the door panel.
