Large Workpiece Spray Coating Machine Tiltable Designed No Dead
Angle
Electrophoresis Coating System:
Techno-economic Advantage of "EDIT" Cathodic Electrocoating:
1. Cathodic epoxy electro coating is highly corrosion resistant. A
thin dry film thickness can withstand long time salt spray test.
2. Electrocoating has the ability to give very even coating with
variances ranging to only 1-2 microns. E-Coating assures the
uniform of coating.
3. Electro coat system has the versatility to coat highly recessed
and complex surfaces, which are not amenable to powder coating or
liquid spray system. So the E-coating can be applied for coating
complex parts.
E-coating usually combines electrophoresis and powder coating.
Products after this treatment get high grade capacity for anti-rust
and anti-scratch. Such features are very important for automotive
parts to deal with different environments.
Full process of e-coating line includes pre-treatment,
electrophoresis and paint or powder coating and the drying &
curing. Each stage is seamlessly connected by automatic conveyor
and could be customized by requirements. Because of dipping
technologies used for this system, any size products can be loaded
with no problem thus it is an ideal choice for mass production.
Product Description
DCM400 Suitable for any kinds of zinc flake paints and related top
coat, seal, teflon coating.
Equipment main body:
1. Weighting loading system.
2. Dip-spin coating system.
3. Conveyor distributor.
4. Operation control system.
Features:
Basket planet type configuration, every time convert direction can
realize the workpiece location swap, the qualified rate of blind
hole workpieces is very high, full automatic design, efficient and
energy saving.
Main parameter:
Tube Basket Diameter | ɸ 650 mm |
Workpiece Tube Load | 80 kg |
Maximum Centrifugal Speed | 350 r/min |
Coating Loading Capacity | 220 L |
Chillers Power | 3 Hp |
Total Power | 11 kw |
