Liquid Beverage Blowing Filling Capping 3-in-1 Packaging Machinery
Equipment
Product Working Process:
1. Preform feed-in and unscrambling
It adopts the matured worldwide-standardized way of preform feed-in
and unscrambling, in which preforms go through preform elevator and
are transmitted to preform unscrambler. Inside the preform
unscrambler, preforms are automatically sorted and delivered by two
inclined revolving cylinders with same speed, and the remaining
ones will be picked by star wheel and sent back to preform hopper.
The whole process of preform unscrambling is fully automatic and
has high efficiency without preform scratches.
2. Heater
It adopts the matured worldwide-standardized way of preform feed-in
and unscrambling, in which preforms go through preform elevator and
are transmitted to preform unscrambler. Inside the preform
unscrambler, preforms are automatically sorted and delivered by two
inclined revolving cylinders with same speed, and the remaining
ones will be picked by star wheel and sent back to preform hopper.
The whole process of preform unscrambling is fully automatic and
has high efficiency without preform scratches.
3. Blowing unit
Special manipulator delivers heated preforms to moulds along
certain cam curve. After stretch pre-blow, the preform will be
blown to bottles by connecting high pressure compressed air.
Special manipulator sends the finished bottle out along certain cam
curve.
4. Filling unit
The blow-made bottles are transported to filler via starwheel.
After entering filler, the bottle is held by gripper of lifting
cylinder and realizes up and down under effect of cam.
The filler adopts gravity filling way. Bottle mouth rises to open
filling valves and start filling. While product rises and plugs up
air return hole, the filling will be finished. After filling,
bottle mouth moves down and leaves the filling valve.
5. Capping unit
Bottles enter capper via transition starwheel. The anti-rotation
knife of capper blocks bottle neck to keep bottle vertical and
prevent rotation. Capping heads keep revolution and do rotation.
Under effect of cam, the action of gripping cap, sleeve cap,
screwing cap and discharging cap to finish the whole capping
course. The finished bottles are conveyed via bottle-out starwheel
onto bottle-out conveyor, and then are sent out of the combiblock.
The whole machine adopts console sealing windows, beautiful and
decent.
Model For water combiblock bottling line:
| NO. | Model | Capacity | Remark |
| 1 | 8-24-8 | 12000bph | |
| 2 | 12-32-10 | 18000bph | |
| 3 | 16-40-15 | 24000bph | |
| 4 | 20-60-18 | 36000bph | |
