0.6~6s adjustable speed 0~6m boom dc brushless servo motor
automatic gate barrier system
PRODUCT DESCRIPTION
This Arm Barrier Gate provides a secure and convenient solution of
stopping unauthorized vehicle or giving
access to authorized vehicle, for parking lots with high traffic
flow such as toll gate, shopping center, exhibition
center, hospitals, airport etc. Thanks to DC motor, solar panel can
be backup power supply.
PRODUCT SPECIFICATIONS
| S10 barriere gate Technical Specification |
| Max .Straight Arm | 2.5m | 3m | 4.5m | 6m |
| Opeing time (Sec) | 0.6 | 0.9 | 1-3 | 2-5 |
| Speed rang | 0.6s-6s |
| Motor rated Power | 100W |
| Duty cycle | 100% |
| Supply voltage | 220V,Or DC24V/12V |
| Frequency | 50Hz/60Hz |
| Drive system | SFMCU |
| Housing Dimensions | 1000*360*300MM |
| Weight (without boom) | Mechanism :25kgs
Gate :45kgs |
| Protection class | IP54 |
| Temperature range | under 35 to 70 °C |
PRODUCT FUNCTIONS & FEATURES
1. NO SENSOR&LIMIT SWITCH
Innovative design which doesn’t need any sensor and limit
switch.All control by SFMCU drive unit precisely.
Four main parts only, mechanical, motor, control unit, power
supply.
2. MAINTENENCE FREE
DC Brushless Servo motor doesn’t need a carbon brush while brush
motor request you replace the carbon
brush in a certain time. Galvanized and powder coated parts are
anti-rust ensure long termusage.
And no other smaller parts need to be maintain too.
3. 24/7 CONTINUS OPERATION
With a very smooth and quiet motorized drive mechanism, Open
and close very stable, offer maximum reliability at fast speeds, in
7*24 hours non-stop usage.
4. SPEED ADJUSTABLE
Our DC servo barrier gate allows you to set opening and
closingspeed according to requirements. Shorter arm,
the faster speed can be set.
5. AUTO-REVERSE FUNCTION
When arm falling and meets obstacles, arm will auto reverse to
prevent further damages.
6. MULTIPLE INTERFACES
6.1. Wire Control Signal Input(open&close&stop)
6.2. Infrared Photocells
6.3. Loop Detector
6.4. R&G Light signal (Up&Down Limit signal output
optional),
6.5. can use for counting purpose also
6.6. Arm Presence Detection(Optional)
6.7. RS485 Communication(Optional)
6.8. More If Required
7. EASY INTEGRATION
Access Reader or Push button or remote controller can be used
totrigger the barrier gate to open via a
simply dry contact signal.After delay timer elapsed, barrier gate
will close automatically byitself in a certain
time(optional function)
8. USER FRIENDLY
Motorized arms provide comfortable passage while maintaining ahigh
level and high density of car flow
management, such as in toll gate.
9. AUTO-RECOVERY
When power off, barrier arm can be lifted up by manual for a
freeexit. When power supply is restored,
Barrier gate will automatically return to close position.
10. Auto Testing Mode
Control board can set auto testing mode
