Roof sheet rolling mc for Russia panel, T21, metal sheet roof roll
forming machine
Quick Detail:
- Thickness : 0.4mm-0.8mm
- Material : PPGL metal sheets, 345Mpa
- Input width : 1250mm
- Effective width: 1068mm
- Material weight : 5MT or as per request
- Coil inner diameter : 510+/-30mm
- Cutting material: Cr12, heat treatment
- Cutting tolerance : ±1mm
Description/Technical Parameter details of complete line:
- 5TX1250mm hydraulic de-coiler with/without coil car
You can adapt to hydraulic un-coiler or manual one as per request,
and the un-coiler capacity 5MT, 6MT, 7MT, 8MT, 10MT also as per the
coil order
- Entry Roller & Manual Pre-shearing device (Un-powered)
To cut off the end of the first or final piece of sheet only
Working thickness: max. 0.8mm
- Roll forming machine with cutting details as below table :
| Suitable roll forming material | Pre-painted Sheets, 345Mpa |
| Thickness range | 0.4mm-0.8mm |
| Coil width | 1250mm |
| Carriage Frame design | Classic wall-plate-frame-design |
| Roll forming steps | 20 steps |
| Material of forming roller | 45# steel, CNC lathes, Hard Chrome Coated to avoid the rusty |
| Shafts Diameter | Φ75mm/95mm |
| Main motor power | 7.5Kw driven motor with gear box |
| Line speed of roll former | 18m/min (Higher speed is available, depends on the specification
required by the buyer) |
| Hydraulic group power | 3.0 Kw or 4.0Kw for quick circle cut |
| Material of cutting blade | Cr12, hear treatment as normal design |
| Electric Voltage Standard | 380V/50Hz/3Ph or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015(Blue) or as per customer’s requirements |
Siemens brand PLC/touch screen, Schneider/ Shihlin/ Delta brand
Inverter, Omron brand encoder
Cut-to-length tolerance≤±1mm
Control Voltage 24V
- Product Rack Un-powered, 3 units
Machine list:
- Hydraulic un-coiler for 5MT capacity
- Normal speed roll former
- Hydraulic cutting device
- Run out table
- PLC control cabinet
Features:
A trapezoidal roof panel roll forming machine is always adjustable
for different feeding widths. You can make trapezoidal roof panels
with different effective widths from different-width materials.
Profile Drawing/Layout/Equipment reference pictures:
