Standard Standing Seam Roll Forming Machine BEMO Roof Panel Flex Lok Making Machine

Flex lok making machine, standing seam roll former, BEMO roof panel, aluminum panel

Brief Introduction standing seam roof sheet roll forming machine:

There are standard standing seam roof panels such as 50-333, 50-429, 65-305, 65-333, 65-400, 65-459 and 65-500, and these profiles can be straight sheet, or tapered sheets. Like other concealed fixing standing seam roofing sheet roll forming machine, standing seam sheet roll forming machine can also handle with different widths material and manufacture different standing seam sheets on the same machine, like one machine can make both 65-400 and 65-450 type roof panels which joint with each other through clips too. Nowadays, Chinese manufactures develop a new type 2-in-1 roll forming machine which can make both straight sheet and tapered roof sheets (the production of tapered roof panels is semi-automatic).

Quick Detail:

1. Thickness : 0.4-0.8mm
2. Material : aluminum, steel, copper, stainless steel and titanium zinc
3. Input width : 478/478/608mm
4. Effective width: 300mm/400mm/430mm
5. Material weight : 3MT
6. Coil inner diameter : 508mm
7. Driven way: by driven motor
8. Cutting way: by hydraulic power pack
9. Cutting tolerance : ±1mm

Machine list:

1. 3T*600mm hydraulic un-coiler
2. Roll forming machine
3. Hydraulic cutting device
4. Run out table
5. Siemens PLC and IOP/ touch screen, Schneider brand inverter

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Pump power=1.5KW

Link-connect expanding system

Load capacity=3Ton

Coiler Width=Max. 600mm

Coil Inner – diameter =451-530mm

Coil outer-diameter=Max. 1500mm

• Polythene film on device before feed in
• Entry Roller & Manual Pre-shearing device (Un-powered)

To cut off the end of the final piece of sheet only

Working thickness: max.0.8mm

• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Profile Drawing/Layout/Equipment reference pictures:

NKH Machinery is an experienced manufacturer of a wide range of roll forming machines, such as panel/roofing tile /purlin /ridge cap /pipe/ metal deck lines/cut to length & recoiling lines/ crimping/curving machines/folding machines, etc.

Over 10 years of experience has allowed us to become aware of and to incorporate the best practices from around the World. It has allowed us to develop our company’s awareness of the importance of design, performance and quality standards in all aspect of the development and delivery of modern roll forming lines.

Excellence is our expectation. A consistent commitment to quality is something we maintain throughout every level of our organization and every individual within it. Whether working in parts or assembly, service or sales, each member of the NKH machinery team participates in the development process of each machine we create. We will meet your high standards by taking full advantage of the experience, creativity, and wisdom each member of our team has to offer. Our overall goal is to ensure the best possible outcome for you, assisting you in generating profits that are well-worth your investment with a NKH Machine.

We are ready to meet you anywhere in the world to discuss your roll forming requirements and you are welcomed to call Our Sales Team to take your initial enquiry.