Lifting height 19ft electric Scissor Lift with 240kg load capacity
Performance Features
Motion System
Imported from Trojan of United State, the capacity of foursome
serial batteries can reach to 225Ah (optional 260Ah), and it can be
used over 8 hours under general conditions.
There is a battery charger which is sealed type with waterproof
grade IP67 and high power conversion efficiency up to94%, adaptive
voltage 85-265v inside the machine and a charging indicator
outside. The charging indicator will give a signal when full charge
finished.
With the battery meter the user could easily notice the battery
volume and the working hour remaining.
Imported electrical motor controller could avoid the current surge
and make the entire machine stable and reliable.
The machine could work while be charging. With various advanced
technologies, the machine is energy saving and consumption
reducing.
Hydraulic System
An open type hydraulic system has applied with explosion prevention
strobe and emergency drop switch.
Electrical Appliance System
Controlled by PLC and CANBUS control, the machine could perform
more accurate for lifting, moving and turning actions. The
protection grades reach to IP65 for the enclosed type charger and
other major electrical components. Using special materials for the
platform control cables (7 core), spiral cables for the control
box, it is more convenient to operate and remove.
Multifarious protections are applied including high-pressure
protection(420v),low-pressure protection, short-circuit protection,
over current protection, temperature protection,inverse connection
protection and battery temperature protection.
Technical Parameters
| Model | SS0607HM |
| Dimentions | Metric |
| Max.Working Height | 7.9m |
| Max. Lifting Height | 5.9m |
| Platform Length | 1.63m |
| Platform Length-Extended | 2.53m |
| Platform Extension | 0.9m |
| Platform Width | 0.74m |
| Height -Unfolded | 2.18m |
| Height-folded | 1.8m |
| Wheelbase | 1.32m |
| Min. Ground Clearance-stowed | 7cm |
| Min. Ground Clearance-Raised | 2cm |
| Productivity |
| Platform capacity | 230kg |
| Extension platform capacity | 100kg |
| Drive Speed | 4km/h |
| Gradeability | 25% |
| Raise/Lower Speed | 16/26sec |
| Turning Radius(Inside/outside) | 0/1.5m |
| Tire | 32.3x10cm |
| Power | Electric |
| Engine | Optional( Perkins,Koher,Deutz,Commins,Yanmar) |
| Hydraulic Oil Tank Capacity | 15L |
| Machine Total Weight | 1500kg |
| Battery | 24V/225Ah |
Our Warranty & Services
warranty policy :If broken during the warranty, we can replacement free.5 years for the main structural ,2 years for the whole machine.
Also our engineers can door to door service if you order with bulk
quantity, if one unit we can technical support online.
Company Information
JESH more than 15 years experience manufacturing and well
established manufacturing and quality control procedures on ISO
9001 basis, all models strictly comply to Chinese standard GB25849,
European CE EN 280:2013+A1:2015. All series machine are CE
certificated via world famous testing organization SGS.JESH owns
two main production bases, they are trial production workshop in
Changsha and mass production workshop in Tianjin, with production
capacity of over 2000 units MEWPs per months.
