Home > Other Security & Protection Products >

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

Name: Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772
Brand: Sinuo
Price: 1 USD

Ask Lasest Price
Brand Name :	Sinuo
Model Number :	SN777
Certification :	Calibration Certificate (Cost Additional)
Price :	Negotiable
Payment Terms :	T/T, L/C, Western Union, MoneyGram
Supply Ability :	10 Sets Per Month
Delivery Time :	20 Days

Add to Cart

Product Details
Company Profile

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

Foam Horizontal Burning Test Chamber ISO9772 Cellular Plastics Small Flame Testing Apparatus

Overview:

This test chamber adopts PLC control and 7" touch screen display, the operation is Intelligent and humanized; uses the integral intake and automatic ignition system, the combustion time delays 0.1S thus to make sure the sufficient time of gas burning; equipped with imported brand flowmeter to ensure the accuracy of the testing.

Principle:

This horizontal burning test equipment is intended to process a small-scale laboratory screening procedure for comparing the relative burning characteristics of horizontally oriented, small cellular plastic specimens having a density less than 250kg/m^-³ determined in accordance with ISO 845, when exposed to an ignition source. It meets the requirements of ISO9772-2012, UL94.

Technical Elements:

Working voltage	230V/50Hz or 110V/60 Hz (can be customized)
Control	Mitsubishi PLC+ Remote Controller
Operation	7" WEINVIEW touch screen
P/PF2 laboratory burner	ISO10093,inner diameter Φ9.5±0.3mm,having a barrel length:100±10mm
Burner wing top	Having an opening of internal length (48±1)mm and internal width (1.3 ±0.05)mm
Gas pressure	0.1MPa
Gas flow and gas category	965±30ml/min, for the methane gas purity of 98% , it can also use the mixed gas or propane gas, flow meter adjustment
Combustion / self-extinguishing time	0-9999X0.1S
Distance between the wing top of the blast burner to the test sample	13±1mm
Flame height	38±2mm,blue flame
Support net	215×75×13mm, grid: Φ0.8 made of stainless-steel wire with length of the side of 6.4mm
Lighting	Equip with lighting in the test chamber, with control
Test chamber and dimension	>0.5 cube,black matte background,with exhaust fan,dimension:11005501200mm,130kg
Testing environment	Temperature: 15°C~35°C Humidity: 45%~75%

How to carry out the testing procedures on this chamber?

1) Press Start button for 3-5s or button 1 on the remote control to light up the flame. Adjust the flame height according to the standard requirements.

2) Close the window door and re-posit the burner under the specimen according to standard requirements, press Start Timing button or button 3 on the remote control to start the flame application time timing. The flame application is 60s, and after reaches 60s the flame is extinguished, and the Elapsed time t_e starts timing.

3) Press te Pause button or button 3 on the remote control to stop the Elapsed time t_e timing when the specimen flam reaches the 60mm gauge mark.

4) Press te/tb Pause button or button 5 on the remote control to stop the Elapsed time t_e and Burning time t_b timing when the specimen ceases to burn or glow before reaching 60mm gauge mark.

5) Press [t_b Pause / Start] to be tb Start or button 4 on the remote control to start the Burning time t_b timing when the specimen flam reaches the 25mm gauge mark, whether the burning is on the bottom, top or edge of the specimen.

6) Press [t_b Pause / Start] to be tb Pause button or button 4 on the remote control to stop the Burning time t_b timing when the flam or glowing combustion front reaches the 125mm gauge mark, or when the specimen ceases to burn or glow before reaching 125mm gauge mark.

7) Operator should calculate out the distance burnt (L_d): this is the distance between the 25mm gauge mark and the point where the flame or glowing combustion front stopped, expressed in millimetres. If the flame front went out before the 25mm mark, record that L_d =0.

8) After each test, open the exhaust fan in time and then clean the support gauze, burner, wing top and chamber; if operator needs to process the second test, press [Count Cleared] to clear all the timers firstly, allow the support gauze to cool to room temperature, check the flame at least once every five tests.

Product Tags:

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Send your message to this supplier

*From:
Your email address is incorrect!
To: Sinuo Testing Equipment Co. , Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

All Categories

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

flame test chamber

flammability test apparatus

Cellular Plastic Materials Flammability Test Chamber Horizontal Burning PLC Control ISO9772

You May Like

IEC 60335-2-10 Glow Wire Flammability Test Chamber Fire Risk Assessment Equipment Button Operation

ISO 3795 Flammability Test Chamber For Automotive Interior Materials

ISO 6941 Flammability Test Chamber Textile Fabrics Burning Tester

Hot Wire Coil Ignition Flammability Test Chamber For Solid Electrical Insulating Materials IEC 60IEC60695-2-20

UL 1581 Flammability Test Chamber For Electrical Cables Wires 225W 500W Flame VW1 FT2 4m³


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!