DX8129 Automatic Iron Pellet Crushing Strength Testing Machine
Introduction:
The composite coat of direct insulator to be tested is installed in
the fog room.Through the wall casing through the side wall of the
fog chamber, one end is located in the fog room, the other end is
located in the fog outdoor part;Dc test power supply is connected through the wall bushing on the
top of the composite coat of the arrester to be tested, and the dc
test power supply is connected through the current sampling unit on
the bottom.The salt water tank and the air compressor are connected to the
spray hole located in the fog chamber through their respective
pipelines.
Standards:
GB/ t19519-2004 and electric power industry standard DL/ t810-2002
have made requirements on the resistance of insulator materials to
electric marking and electric corrosion.
Specification:
1. Input voltage: AC-220v
2. Output voltage: AC0 ~ 50KV, dc-50 ~ 0kv adjustable
3. Electrical capacity: 50KVA
4. Voltage test accuracy: <2%
5. High side output current: ≥1A
6. High side output current: >250MA, maximum voltage drop <5%
7. Current measurement accuracy: <1%
8. Alarm threshold current: 0 ~ 1.5A adjustable
9. Over-current disconnect time: ≤250ms
10. Distance between sprinkler head and ground: >500CM
11. Distance from nozzle to sample: >500CM
12. Distance from the top of the fog chamber: >400mm,
13. Distance from the wall: >400mm
14. Quantity of test product: 1 horizontal product, 1 vertical
product, multi-group matching
15. Test time: 0 ~ 9999H, adjustable
16. Use glass nozzle to atomize evenly
17. Spray speed at the sample: 3M/S
18. Spray volume: 0 ~ 0.9L/m3/h adjustable
19. The volume of fog chamber is 3m3
20. Spray liquid: NaC1 and deionized water prepared brine
21. Brine bucket with stirring device
22. The brine bucket has the function of water level indication and
water shortage alarm;
Company profile:
DAXIAN's testing equipment are widely used in various field:
scientific institutions, colleges, inspection institutions, auto
parts, electronics, electricals, LED, photoelectricity, mobile,
plasticand rubber, telecommunication, chemical industry, aerospace,
building material and product, wire and cable,textile and fabrix,
etc. All DAXIAN testing equipment are designed according to
international test standards, such as ISO, ASTM, DIN, EN, GB, BS,
JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.
