Promise PP Strap Making Machine Tensile Strength Box Packaging
Plant Production Line
Savings
Polyester’s unique qualities make it one of the best strapping
materials to use for securing any type of palletized or unitized
load.Depending on the size of steel strapping currently being used,
polyester strapping can provide up to a 25% savings in strapping
costs. Polyester can eliminate
the need for metal seals in certain applications, which provides
additional savings and reduces product damage that might occur
through the use of other packaging alternatives.
Proven Performance
Strapping Systems Research and Development efforts have led to the
introduction of industrial strength polyester strapping, approved
by the Association of American Railroads (AAR) for open top and
closed rail car shipments of Brick, Lumber and other panel
products.
Ease of Disposal
Polyester strapping can be easily disposed of by rolling or
bending. Also, it can be cut into small pieces with our HLC-80
Strap Chopper and accumulated for recycling.
Elongation Recovery
Polyester strapping provides approximately 2% elongation at normal
work tension, which allows the materials to stretch. The strapping
will recover this elongation however, keeping the strapping tight
around the package even if the load settles and shrinks in size.
Moisture & UV Resistant
Because it is plastic, it is moisture resistant and therefore
unaffected by rusting that might occur with other packaging
alternatives which may stain or affect the quality of your product
before it gets to its destination. Our polyester strapping is also
UV resistant to protect strapping from long
periods of exposure to the sun.For other strap sizes and gauges,
please cont
Plastic Strapping
Plastic strappping materials are made from Polyester,Polypropylene
and are available in a variety of strengths,styles,and
finishes.Unlike steel strapping,elongation and recovery are a key
factor for deciding which type of plastic strap to use.
Polypropylene Strapping
Polypropylene strapping is the most economical of all strapping
material due to it's light weight and versatility.it is available
in a wide variety of sizes and gauges and offers the greatest
elongation of any strapping type,along with good initial recovery
characteristics.polypropylene can be heat sealed with joint
efficiency of 70 to 80%.
Features and Benefits of Polypropylene Strapping:
- Economic
- Highest Level of Elongation
- Little Recovery
- Low Strength
PP strap making machine is mainly for producing PP strap.
The raw material can be 100% recycled material, which can reduce
the produce cost and get a good profit.
And The PP bale is the substitution of the steel strap and has a
lot of advantages such as good extension, high temperature
resistant, easy use.
It is mainly suitable for packaging for various trades.
Advantage of our machine
- PP raw materials do not need to separate the dry and water
treatment . There are automatic circulation on preheating and
drying that save a large number of equipment investment and reduce
the production cost by 30%;
- Utilizing the retrieving bottle slice as raw materials that
reducing the cost to a great extent;
- With the multi-purpose machine, produce the PP PET straps in
different specifications directly and don not need to change the mould head;
- Comparing with new polyester slice, the transparency of products is
just the same, but the tensile strength and shock
resistance are up to the international grade;
- Low Energy consumption, but high production capability;
- Easy to operate, save the manpower and two persons for one
production line on average
PP strap making machine model
| Model | SJ-65 | SJ-80 | SJ-90 |
| Extruder | SJ-65/28 | SJ-80/28 | SJ-90/28 |
| Productivity | 60-100kg/h | 80-120kg/h | 120-150kg/h |
| Drive Motor | 22kw | 30kw | 55kw |
| Two-station Winder | 80-120m/min,adjustable |
| Strap Size | Width:5mm-20mm | Width:10mm-25mm | Width:20mm-35mm |
| Thickness:0.36mm-1.0mm | Thickness:0.5mm-1.3mm | Thickness:0.5mm-1.8mm |
| Installed Capacity | About 40kw | about 60kw | about80kw |
| Line Dimension | 26m×2m×2.2m (L×W×H) | 26m×3m×3m (L×W×H) | 26m×5m×3.5m (L×W×H) |
System Configuration of the Production Line
| NO. | Name | QTY |
| 1 | Color Mixer | 1 set |
| 2 | Vacuum feeder or screw loader feeder
(100% raw material use vacuum feeder machine;recycled material use
screw loader feeder machine) customer choose one of it. | 1 set |
| 3 | Hopper dryer | 1 set |
| 4 | SJ single screw extruder | 1 set |
| 5 | High speed Screen exchanger device | 1 set |
| 6 | Molud | 1 set |
| 7 | Water cooling tank | 1 set |
| 8 | The first traction machine- 5 rollers | 1 set |
| 9 | The first Stretch forming oven | 1 set |
| 10 | The Second traction machine- 5 rollers | 1 set |
| 11 | The second Stretch forming oven | 1 set |
| 12 | The Third traction machine- 3 rollers | 1 set |
| 13 | Embossing machine | 1 set |
| 14 | The Winder machine | 1 set |
