HJF-530 servo injection molding machine
Introduction:
1.Reliable plastic injection machine with servo motor ,equiped with
servo motor , closed loop control for pressure and flow .Low
noise,high precision and energy saving .
We design,manuafcture and supply our own brand of injection molding
machine with clamping force ranged from 800kn to 30000kn, injection
weight from 90g to 40000g, and can provide custom-built machine.
2.Inject all kinds of plastic parts, bottle preform, engineering
plastic, UPVC, PVC, PE pipes fitting, pomponents for automotive,
household, eletronics, telecommunication, ETC
Plastic parts injection machine features:
→ bigger space between tie-bars
→ central-clamping structure
→ famous components
→ energy saving with servo motor
→ low noise, fast respons
→ high precision, Stable and super long life
→ T-Slot Platen
→ abundant Spare Parts
→ better price
Electronically Controlled Unit
1. CPU controller and display are independent and reliable.
2. A larger color LCD screen enhances clear display and support
multi-language compatibility.
3. The control system also support remote monitor.In the event of a
control problems,the machine can be connected to internet through a
special interface.Inject service can realize remote fault diagnosis
and maintenance.
4. A screen saver function extends the LCD life.
5. Ultra bright LED is provided for input and output point
inspection.Proving convenient indication of the machine’s operation
and machine service.
6. A data hardware lock is provided to prevent unauthorized people
from effecting the machines performance.
7. Closed loop PID barrel temperature control.
8. Dust and waterproof control cabinets provide a neat and tidy
enclosure all electric control components.
| SPECIFICATION | HJF530 |
| Screw Type | A | B | C | D fruit basket |
| Screw Diameter | Mm | 75 | 80 | 85 | 100 |
| Screw L/D Ration | L/D | 22.7 | 21 | 20 | 17.5 |
| Shot Size(Theoretical) | cm3 | 1727 | 1965 | 2218 | 2904 |
| Injection Weight(PS) | g | 1560 | 1788 | 2018 | 2614 |
| Injection Rate | g/s | 386 | 442 | 499 | 625 |
| Injection Pressure | MPa | 191 | 168 | 148 | 115 |
| Screw Speed | rpm | 130 |
| Clamping Force | KN | 5300 |
| Opening stroke | Mm | 820 |
| Space Between Tie Bars | mm | 820*820 |
| Max.Mold Height | mm | 810 |
| Min.Mold Height | mm | 330 |
| Ejector Stroke | mm | 240 |
| Ejector Tonnage | KN | 150 |
| Max.Pump Pressure | MPa | 16 |
| Pump Motor Power | KW | 45 |
| Heater power | KW | 31.4 |
| Machine Dimension(L*W*H) | M | 8.4*1.92*2.76 |
| Machine weight | T | 20 |
| Oil Tank Capacity | L | 900 |
Haijiang Machinery Main configuration
Standard machinery
| PLC | TECHMATION (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | Schneider(France) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA)/Schneider(France) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
SPARE PARTS( FOR FREE)
| 1. Mold clamping with bolts: 8PCS, | 2. Nozzles: 1PCS, |
| 3. Toolbox: 1SET, | 4. Heating Ring: 2PCS, |
| 5. Lubrication Oil: 1 Bucket | 6. Limit Switch: 2PCS, |
| 7. Hexagon Wrench: 1SET, | 8. Thermocouple: 2PCS |
| 9. Seal Ring: 2PCS, | 10. Machine shockproof pads: 6PCS, |
| 11. Vise: 1PCS, | 12. Power socket for auxiliary machines: 2PCS, |
| 13. Wrench: 1PCS, | 14. Screwdriver: 2PCS, |
