CLEx Explosion-proof LED Head Light 3W 300Lm LED Headlamp with CE
ROHS
Technical Parameters
No. | Parameter | Unit | Value |
1 | Rated Power | W | 3 |
2 | Rated Capacity | Ah | 2.2 |
3 | Light Source | Luminous Flux | lm | 300 |
LifeSpan | h | 100,000 |
4 | Working Time | High Light | h | 5.5 |
Weak Light | 12 |
5 | Charging Time | h | 6 |
6 | Battery Life | Cycle | 1000 |
7 | Dimensions | mm | 65*80*65 |
8 | Weight | g | 90 |
9 | IP Rating | - | IP65 |
10 | Ex Mark | - | Ex d IIC T4 Gb |
Usage
1. Before use, plug the plug of the dedicated charger into the
charging hole on the side of the head light for charging.
The charger indicator is red when charging, and the indicator turns
green when fully charged.
2. When using, press the switch to enter high light, press the
second time to enter low light, press the third time to turn off,
if in the high light or low light mode, press for 1 second, then
enter the strobe light.
3. The operation mode of the power detection function is: close the
file and press the switch for 3 seconds to automatically enter the
power detection. The weak light flashes 5 times to indicate 80%
power, the flash 4 times means 60% power, and the flash 3 times
means 40% power, flash 2 The number indicates less than 20% of the
power, and one flash indicates that less than 10% of the battery
needs to be charged.
4. With real-time power monitoring display function, you can know
the remaining battery power of the lamp at any time. The battery
display
mode is: the LED light behind the lamp head turns on after the lamp
is turned on, the battery power is higher than 30%, the green light
is on,
and the battery power is lower than 30. When the red indicator is
displayed, the red light is displayed. When the power indicator is
red, the lamp
can only be used for about 1 hour. Please replenish the lamp in
time after use.
5. It has stepless focusing function and stepless illumination
direction. When focusing, please turn the front cover of the lamp
head
by left or right on the lamp head to realize the focusing function.
The lamp head can be adjusted by moving the lamp head up and down.
Focusing Function
Adjustable Function
6. There are a variety of wearing methods, which can be hand-held,
waist-mounted and head-mounted. When hooking, hook the hook of the
headlight into the seat of the helmet or the headgear. The headgear
can be adjusted according to your needs, that is, the E-shape on
the
headgear can be loosened to adjust the length. If worn on a helmet,
hook the four hooks on the headgear to the edge of the helmet to
prevent it
from slipping.
